Your Selected Vehicle
Parts for your 1995 Toyota Hilux surf-Headlight bulbs
Narva Model 63 Front End Outline Marker, Side Indicator (Amber) Or External Cabin Marker Lamp Black Base And 0.5M Cable
Narva 9-33 Volt Surface Mount LED rear end outline marker lamp(red) with Black cover and 0.5m cable - 96832B
Explore 4WD & Adventure
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Narva MDL38 Stop/Tail/Indicator Red-Amber Lens LED 10 to 30V - 2 Pce - 93812BL2
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Narva Model 18 LED Side Marker/Cabin Marker/FEOM Light Amber 10-30V - 91800
Narva 9-33 Volt Surface Mount LED Side marker lamp(red/amber) with Chrome cover and 0.5m cable - 96802
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97010-1-D
1995 Toyota Hilux Surf headlight bulbs
Headlight bulbs are very much used on the 1995 Toyota Hilux Surf. Toyota’s service literature and parts catalogues back this up: the Toyota Repair Manual for Hilux Surf/4Runner (RM184E, N130 series) and the Toyota Electronic Parts Catalog list replaceable halogen bulbs for this model year. For 1995 builds on the N130 chassis (up to around July ’95), the headlamps typically take H4 60/55 W dual‑filament bulbs. For late‑1995 third‑generation Surf (185 series), Toyota specifies separate bulbs: HB4/9006 for low beam and HB3/9005 for high beam. The owner’s handbook for the respective chassis confirms these fitments and wattages.
On this Surf, the headlight bulbs do the heavy lifting for safe night driving, punching a clear, legal beam pattern down the road and keeping oncoming traffic happy with a crisp low‑beam cutoff. Halogen bulbs are affordable, easy to source, and designed to work perfectly with the factory reflectors and lenses, so light colour and spread stay compliant with local regs.
As part of regular servicing, it pays to show the headlight bulbs a bit of love:
- Replace in pairs to keep brightness and colour even across both sides.
- Stick to the factory wattage (H4 60/55 W or HB3/HB4 as specified) to avoid melted connectors or reflector damage.
- Handle new bulbs by the base only—oily fingerprints shorten bulb life.
- Check for dull, yellowed, or crazed lenses, a quick polish can restore output.
- Confirm beam aim after any replacement or front‑end work.
- Inspect plugs for heat discolouration and fix any voltage drop or poor earths.
DIY bulb replacement is straightforward on the Hilux Surf. Access the rear of the headlamp, unplug the connector, peel back the rubber boot (if fitted), unclip the spring, and withdraw the bulb. Align the new bulb’s locating tabs carefully, refit the spring and boot, then reconnect. If the vehicle is a late‑1995 185 series with separate high/low bulbs, repeat for each holder. With fresh halogens fitted, the Surf’s lights will feel brighter, whiter, and far more confidence‑inspiring on those long Aussie and Kiwi night drives.
Popular questions
What bulb type fits a 1995 Hilux Surf?
Early 1995 N130 models generally use an H4 60/55 W dual‑filament bulb for both high and low beam in each headlamp. Late‑1995 185 series models typically use HB4/9006 for low beam and HB3/9005 for high beam. Checking the build plate and lamp back cover markings (or the Toyota EPC) will confirm which you’ve got.
Can I upgrade to LED bulbs?
Many LED retrofits physically fit, but legality and beam quality vary. Because the Surf’s reflectors were engineered for halogen filaments, some LEDs can scatter light or dazzle. If considering LEDs, choose ADR/UNECE‑compliant units matched to your housing and verify local rules in Australia or New Zealand before fitting.
How often should the bulbs be replaced?
Halogen bulbs tend to dim before they die, so many owners refresh them every 2–3 years or when output looks tired. Replace both sides together, check aim, and inspect connectors and lenses during the same service.