Your Selected Vehicle
Parts for your 1995 Toyota Caldina-Headlight bulbs
Repco 12V LED RearCombination Lamp Stop / Tail / Indicator / Licence Plate Pair 150x80x25mm - RLT150LBL2S3
LED Autolamps 12/24V Stop/Tail/Indicator Light Clear Lens Coloured LEDs Surface Mount - 12ARM-2
Explore 4WD & Adventure
1995 Toyota Caldina headlight-bulbs
Based on technical references including the Toyota Caldina (T19# series) Owner’s Manual for the mid-1990s models and Toyota’s Electronic Parts Catalogue, the 1995 Toyota Caldina uses replaceable halogen headlight bulbs, commonly the H4 12V 60/55W type for combined low/high beam. Some trims with different lamp housings may split high and low beams using 9005 (HB3) and 9006 (HB4) bulbs. In short, headlight-bulbs are absolutely relevant on this vehicle.
On a 1995 Caldina, the headlight bulb’s job is simple but vital: throw a clean, white beam down the road so night driving stays safe and within local regs. Halogen bulbs sit inside the reflector or projector housing, and when they age, output drops and colour shifts to a dull yellow. That’s why most technicians recommend replacing bulbs in pairs to keep the beam balanced left to right.
For servicing, a quick look at the lamps should be part of routine maintenance. Cracked lenses, moisture inside the housing, or hazy plastic will all rob light, even with new bulbs. Aiming matters too—beam height and cut-off should meet Australian Design Rule (ADR) requirements and New Zealand WoF expectations, otherwise glare and poor reach become a problem.
Replacement on the Caldina is straightforward and usually done from the engine bay. Typical steps are:
- Confirm bulb type (most are H4 60/55W