Your Selected Vehicle
Parts for your 1995 Nissan Primera-Headlight bulbs
9-33 Volt LED Rear Direction Indicator and Twin Stop Lamps with LED Tail Rings - 94364C
9-33 Volt LED Reverse, Rear Direction Indicator and Stop Lamps with LED Tail Rings - 94365C
Explore 4WD & Adventure
1995 Nissan Primera Headlight Bulbs: Fitment, Purpose, and Easy Service Tips
Based on technical sources including the Nissan Primera P10 Owner’s Manual (1995), the Factory Service Manual (EL – Lighting section), the Haynes Service & Repair Manual for Nissan Primera (1990–1999), and major bulb catalogues from Philips and OSRAM, the 1995 Nissan Primera (P10) uses replaceable halogen headlight bulbs. Most AU/NZ and UK/EU models take an H4 dual‑filament 60/55W for combined low and high beam. Some variants may have a separate high beam (often H1), so it’s smart to confirm via the lens marking (e.g., “H4”) or the vehicle handbook. Headlight bulbs are therefore absolutely relevant to this model.
The headlight bulb on a ’95 Primera does the heavy lifting for safe night driving and wet-weather visibility, helping the car meet local on-road requirements. Halogen H4 bulbs give a solid, road-legal beam pattern when paired with the factory reflector housing, keeping glare down for oncoming traffic while lighting the way ahead.
For servicing, it’s an easy under‑bonnet job most owners can tackle with basic care. Replace bulbs in pairs so colour and brightness stay even side‑to‑side. If the lights are going a bit yellow, flicker over bumps, or the beam pattern looks patchy, the filament is likely tired or the connector is a bit grubby.
- Before starting, switch the lights off and let the bulb cool. Pop the bonnet and access the rear of the headlamp.
- Unclip the rubber dust cover, unplug the connector, then release the spring clip holding the bulb.
- Fit the new bulb in the same orientation. Don’t touch the glass with bare fingers
