Your Selected Vehicle
Parts for your 1993 Suzuki Vitara-Tail lights
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Assembly With 4 Lamps - 80BARRWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflector 150x80x22M - 151BAR
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva 9 - 33 Volt LED Rear Stop/Tail And Direction Indicator Lamp Kit (Red/Amber) - 94526
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflex Reflector 2 Pack - 151BAR2
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
Fitment Notes:
Hella DuraLED Combi-S Heavy Duty 12/24V LED Stop/Tail/Indicator Lamp with6M Lead - 23786MBULK
Fitment Notes:
LED Autolamps 12/24V 16 LED Stop/Tail Indicator Lamp Black Bracket Blister Pack - 201BSTIM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp Black Bracket With 40cm Wire - 80BSTIM
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
Fitment Notes:
LED Autolamps 12V 82 Series Stop/Tail/Indicator/Reverse Lamp Black Bracket - 82BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
Fitment Notes:
Narva 9-33 Volt L.E.D Reverse Lamp White with Red L.E.D Tail Ring and Black Base - 94312
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Fitment Notes:
LED Autolamps Stop/Tail Indicator With 18 Square LEDs Multi Volt Blister - 35ARM
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse With Reflectors And 500mm LP Cable - SO283ARWM2LR12
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Flood Pattern 4 LED Work Light - LEDWORK-C4-FLOOD
Fitment Notes:
Repco Wireless 1.5M Trailer Board With Rear Combination Lights 20 Metre Range - RTBW
Fitment Notes:
Guide to Maintaining and Replacing Tail Lights on Your 1993 Suzuki Vitara
Tail lights are a crucial component of your 1993 Suzuki Vitara, providing illumination and signalling to other drivers. Whether you're heading out on a night drive or simply making your way through evening traffic, well-functioning tail lights ensure you're visible and safe on the road. If there's a fault or you notice dimming, it might be time to either replace or maintain these vital lights.
Replacing the tail lights on your Vitara isn't necessarily an arduous task, but it does require a bit of patience and attention to detail. Start by gathering the right tools, such as a screwdriver and replacement bulbs or light housings, according to what needs repairing or replacing. Always opt for quality bulbs to ensure longevity and brightness.
The process of replacing a tail light generally involves opening the boot to access the tail light assembly. Typically, you'll need to remove a couple of screws or fasteners that hold the lighting assembly in place. Once it's loose, you can gently pull the assembly out to access the back where the bulbs are housed. Carefully twist and remove the old bulb, and replace it with a new one. Make sure the bulb fits into the socket securely, then test it by turning your lights on before reattaching the assembly.
- Inspect for any additional damage such as cracked plastic covers which could allow moisture to enter and damage the bulbs.
- Check that the electrical connectors are secure and free of corrosion.
Regular maintenance of your tail lights extends beyond simply changing bulbs. Keeping the tail light lenses clean ensures maximum light output. Clean them gently using soap and water to remove any dirt or grit. Additionally, applying a layer of car wax can help protect the lenses from environmental wear and tear.
- Check the wiring and connectors periodically to ensure they're in good condition.
- Look out for any signs of moisture inside the tail light assembly as this could cause electrical issues.
Sometimes, your tail light issues might not stem directly from the bulb. The wiring leading to the tail lights can often be part of the problem, so if new bulbs don't work, a closer examination might be needed. Enlist professional help if you're unsure about handling electric components yourself.
If at any point you feel unsure or encounter unexpected issues, it might be a good idea to consult a professional mechanic. They have the expertise to manage tricky replacements and ensure everything is in working order. By paying a little extra attention to your 1993 Suzuki Vitara's tail lights, you guarantee a safer and less stressful driving experience for yourself and others on the road.