Your Selected Vehicle
Parts for your 1993 Suzuki Swift-Tail lights
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Assembly With 4 Lamps - 80BARRWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflector 150x80x22M - 151BAR
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva 9 - 33 Volt LED Rear Stop/Tail And Direction Indicator Lamp Kit (Red/Amber) - 94526
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflex Reflector 2 Pack - 151BAR2
Fitment Notes:
Explore 4WD & Adventure
Hella DuraLED Combi-S Heavy Duty 12/24V LED Stop/Tail/Indicator Lamp with6M Lead - 23786MBULK
Fitment Notes:
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
Fitment Notes:
LED Autolamps 12/24V 16 LED Stop/Tail Indicator Lamp Black Bracket Blister Pack - 201BSTIM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp Black Bracket With 40cm Wire - 80BSTIM
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
Fitment Notes:
LED Autolamps 12V 82 Series Stop/Tail/Indicator/Reverse Lamp Black Bracket - 82BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
Fitment Notes:
Narva 9-33 Volt L.E.D Reverse Lamp White with Red L.E.D Tail Ring and Black Base - 94312
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Fitment Notes:
LED Autolamps Stop/Tail Indicator With 18 Square LEDs Multi Volt Blister - 35ARM
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse With Reflectors And 500mm LP Cable - SO283ARWM2LR12
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Flood Pattern 4 LED Work Light - LEDWORK-C4-FLOOD
Fitment Notes:
Repco Wireless 1.5M Trailer Board With Rear Combination Lights 20 Metre Range - RTBW
Fitment Notes:
1993 Suzuki Swift Tail Lights: Replacement and Maintenance Tips
Tail lights are an essential component of your 1993 Suzuki Swift, ensuring visibility and safety on the road. If you're looking to replace or maintain your vehicle's tail lights, there are a few things to keep in mind. Regular checks and prompt replacements can help prevent unexpected issues, ensuring your Swift stays roadworthy and complies with safety standards.
When inspecting your tail lights, start by checking for any obvious signs of damage. Cracks or condensation inside the light can indicate that the seal is compromised, which can lead to additional faults if not repaired. Replacing a damaged tail light cover is crucial to prevent further issues, such as electrical faults or corrosion.
If a bulb has burned out, you'll need to replace it promptly. A burnt-out bulb not only reduces visibility but can also attract fines. Thankfully, replacing the bulb in your Swift's tail light is a straightforward task. Simply locate the bulb holder by accessing the rear of the tail light from the boot. Carefully twist and remove the holder, then replace the old bulb with a new one. Be sure to handle the new bulb with a cloth or gloves to avoid transferring oils from your skin onto the glass, which can shorten the bulb's lifespan.
It's a good idea to periodically check the electrical connections to ensure they are secure and corrosion-free. If you notice corrosion, gently clean the contacts with a wire brush and apply a small amount of electrical contact cleaner to maintain good connectivity. Regular checks can head off potential wiring issues which could affect not just the tail lights but other electrical systems in the car.
- Ensure all tail lights are functioning by having someone stand behind the car while you operate the lights from the driver's seat.
- Remember to check not just the primary tail lights but also brake lights, indicators, and reverse lights.
Keeping the lenses clean is another aspect of maintaining your vehicle's lighting system. Dirt or foggy lenses can reduce the effectiveness of the tail lights, decreasing your visibility to other drivers. Wipe down the lenses with a soft cloth and a mild cleaning solution to keep them clear and bright.
When it's time to purchase new tail lights or bulbs, make sure you choose products that are compatible with your 1993 Suzuki Swift. Aftermarket options can offer enhanced brightness or style but ensure that any modifications comply with local road safety regulations.
Consistent maintenance and timely replacements are key to ensuring the tail lights on your 1993 Suzuki Swift remain in optimal condition. Keeping your lights in good working order not only helps you see better on the road but also makes sure other drivers see you, ensuring a safer driving experience.