Your Selected Vehicle
Parts for your 1993 Suzuki Jimny-Tail lights
Repco 12-24V LED Rear Combination Lamp Stop/Tail/Ind/Rev 100X275X22mm - RLT275STIR
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable - 97010-1
Fitment Notes:
LED Autolamps 355 Series Multi Volt Black Stop/Tail/Indicator/Reverse/Reflector LHS & RHS Twin Blister Pack - 355BARWM-2
Fitment Notes:
LED Autolamps 12/2V Maxilamp LED Stop/Tail/Indicator/Reflector Black Chrome Bolt Mount - MAXILAMPC1XCE
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator With 18 Square LEDs Twin Blister - 135ARM/2
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Clear Lens Chrome Bracket - 82CARW
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly With 123 LEDs - 100BARWM
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Diffused Pattern 4 LED Work Light - LEDWORK-C4-DIFFUSE
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse/Reflector Mini Jumbo Twin Blister - 420ARRWM2
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Chrome Bracket Blister Pack - 82CARRW
Fitment Notes:
Stedi C-4 Black Edition Flush Mount 4 LED Work Light Flood Beam - LEDFLUSH-C4-FLOOD
Fitment Notes:
LED Autolamps MultiVolt R.H.S Stop/Tail/Indicator Assembly 128 Round LEDs - 125BARMR
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Assembly 72 LEDs With Black Bracket - 200BARM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Assembly 72 LEDs With Black Bracket 190x100x28mm - 80BARM
Fitment Notes:
Narva 9-33 Volt LED Reverse (White) With Red LED Tail Ring, 155mm Contoured Chrome Cover - 95628
Fitment Notes:
LED Autolamps RHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284RHS
Fitment Notes:
LED Autolamps LHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284LHS
Fitment Notes:
9-33 Volt LED Reverse, Rear Direction Indicator and Stop Lamps with LED Tail Rings - 94365C
Fitment Notes:
LED Autolamps Rear Taillight Harness To Suit MY22 Ranger / MY20 Ram Plug To Bare Wires - PATCH-RAM.UNI
Fitment Notes:
9-33 Volt LED Rear Direction Indicator and Twin Stop Lamps with LED Tail Rings - 94364C
Fitment Notes:
LED Autolamps 385 Series Rear Combination Lamp LHS with 7 core plug - 385ARWMLCSB
Fitment Notes:
LED Autolamps 385 Series Rear Combination Lamp RHS with 7 core plug - 385ARWMRCSB
Fitment Notes:
Maintaining and Replacing Tail Lights on Your 1993 Suzuki Jimny
When it comes to keeping your vintage 1993 Suzuki Jimny in top shape, ensuring that all components, including the tail lights, are functioning properly is key. Tail lights are essential for safe driving, signalling your presence and intentions to other road users, particularly in low-light conditions. Regular maintenance and timely replacement are necessary to ensure they remain in good working condition.
First off, it's important to inspect your tail lights regularly. Make it a habit to check for any signs of damage, such as cracks or water ingress, which can lead to more significant issues over time. While inspecting, also make sure that the bulbs are functioning correctly. Over time, bulbs can burn out or become dimmer, which reduces visibility. Catching these issues early can save you from potential accidents or fines.
If you notice that your tail lights are flickering or have stopped working, it may simply be a bulb replacement issue. Fortunately, swapping out the bulbs on a 1993 Suzuki Jimny is a relatively straightforward process that most car owners can tackle themselves. Here's a quick guide to replacing those bulbs:
- Turn off your vehicle and ensure the lights are switched off.
- Open the rear boot of your Jimny to access the tail light assembly from inside.
- Unscrew the tail light assembly, typically, this involves removing a few screws or clips holding the cover in place.
- Carefully remove the assembly to expose the bulb sockets.
- Identify the faulty bulb, twist it counterclockwise and pull it out.
- Insert the new bulb into the socket, ensuring it's secured properly by twisting it clockwise.
- Reassemble the tail light assembly by reversing the removal process.
- Test the new bulbs by turning on your vehicle's lights to ensure they're working correctly.
For those who prefer to leave it to the experts, visiting a trusted mechanic or service centre is always a good option. They can ensure the tail lights are properly fitted and check for any electrical issues that may not be immediately apparent.
Some tips for prolonging the life of your tail lights include avoiding harsh chemical cleaners that can degrade the lens and keeping the surface clean from road grime and dirt which can dull the lights over time. Upgrading to LED bulbs is another option to consider. Though initially more expensive, LEDs last significantly longer than traditional bulbs and offer better brightness and visibility.
Don't forget to include tail light checks as a part of your regular vehicle maintenance routine. Whether you're doing a pre-road trip check or just your regular service interval, maintaining your 1993 Suzuki Jimny's tail lights will ensure your safety and the longevity of your vehicle. Happy driving!