Skip to content Skip to navigation menu

Your Selected Vehicle

Brands

Show More Show Less

Price

Parts for your 1992 Mitsubishi Pajero-Coolant

Sort by
GV Demineralised Water 5L - DEMIN-05L

GV Demineralised Water 5L - DEMIN-05L

$12
Fitment Notes:
See More
GV Demineralised Water 2L - DEMIN-02L

GV Demineralised Water 2L - DEMIN-02L

$6
Fitment Notes:
See More
Bedia Liquid Level Coolant Probe - 320408

Bedia Liquid Level Coolant Probe - 320408

$643
Fitment Notes:
See More

Explore 4WD & Adventure

VDO Temperature Sensor 1/8 - 27NPT Stud Terminals - 320.093
VDO

VDO Temperature Sensor 1/8 - 27NPT Stud Terminals - 320.093

$75
Fitment Notes:
See More
VDO Temperature Switch 1/4 - NPTF - 320.714
VDO

VDO Temperature Switch 1/4 - NPTF - 320.714

$644
Fitment Notes:
See More
VDO Low Water Level Probe 30mm Long - 230.058
VDO

VDO Low Water Level Probe 30mm Long - 230.058

$143
Fitment Notes:
See More
Redarc Probe Kit for LCA1224 - LCAPROB

Redarc Probe Kit for LCA1224 - LCAPROB

$92
Fitment Notes:
See More
Showing 1 - 18 of 18 products

Maintaining Your 1992 Mitsubishi Pajero's Coolant System

When it comes to maintaining the health and longevity of your 1992 Mitsubishi Pajero, attention to the coolant system is key. The coolant, often referred to as antifreeze, plays a pivotal role in keeping your engine from overheating as well as preventing corrosion within the cooling system. Ensuring your coolant system is in top condition is crucial for the performance of your Pajero, especially given its age.

Coolant should be replaced as part of your regular vehicle maintenance. Typically, it's recommended to change your coolant every two years or 30,000 kilometres, whichever comes first. However, it's always best to consult your vehicle's manual or speak with a trusted mechanic to get advice tailored to your driving conditions and frequency.

  • Begin by checking your coolant level regularly. Look for the coolant reservoir under the bonnet and ensure it's filled to the appropriate mark. Engine heat will expand the coolant, so it's best to check when your engine is cool.
  • Keep an eye out for signs of old or contaminated coolant. If the coolant is looking muddy or rusty, it's due for a change. Discoloured coolant can indicate the presence of rust or debris that could clog the system or damage the radiator and heater core.
  • When replacing coolant, always use the type recommended by Mitsubishi for the Pajero. Using the wrong type can lead to inadequate cooling and corrosion, potentially damaging the engine.
  • Consider flushing the system at longer intervals. Over time, rust inhibitors in the coolant can deteriorate, leading to rust build-up. A complete flush ensures that any residual debris is removed, allowing fresh, effective coolant to work efficiently.

It's advisable to perform a thorough rinse of the cooling system with distilled water before adding new coolant to ensure any old coolant is properly removed. Once flushed, fill the system with the new coolant mixture, ensuring there's no air trapped within the system. You might need to bleed the system of air, which can be done by running the engine with the radiator cap off and keeping an eye on the coolant level.

If your Pajero frequently sits unused, or if you mainly drive in stop-and-go traffic, you may need to replace the coolant more often. These conditions increase the likelihood of sludge build-up within the system, which can impair performance.

Routine checks and proper maintenance of the coolant system will ensure your Mitsubishi Pajero continues to run smoothly, preventing expensive repairs down the line. Taking the time to address this aspect of vehicle care helps keep your Pajero reliable and effective on any journey. Remember, a well-maintained cooling system is essential in protecting your engine from extreme temperatures throughout the year.