Your Selected Vehicle
Parts for your 1991 Nissan Primera-Headlights
Narva Battery Master / Isolation Switch Plastic With Removable Key (Contacts Rated 100A at 12V) - 61038BL
Narva Sealed Rocker Switch Off/On SPDT 12V Blue Illuminated LED Light Bar Symbol (Contacts Rated 20A @ 12V) - 63145BL
Narva Sealed Rocker Switch Momentary On/Off/Momentary On DPDT 12V Blue Illuminated Winch Symbol (Contacts Rated 20A @ 12V Only) - 63148BL
Explore 4WD & Adventure
Narva Mitsubishi Style Sealed Push Switch Off/On SPDT 12V Blue LED Illuminated Driving Lights Symbol (Contacts Rated 3A @ 12V) - 63364BL
Narva Heavy Duty Toggle Switch Momentary On/Off/Momentary On DPDT (Contacts Rated 25A @ 12V) - 60068BL
Narva OE Style Sealed Push Switch Off/On SPDT 12V Blue LED Illuminated Driving Lights Symbol (Contacts Rated 3A @ 12V) - 63316BL
Narva Sealed Rocker Switch Off/Momentary On SPST 12V Amber Illuminated (Contacts Rated 20A @ 12V) - 63126BL
Narva Rotary Battery Master / Isolator Switch With Removeable Keyed Knob (Contacts Rated 100A @ 12V) - 61036BL
Narva Battery Master / Isolation Switch Plastic With Removable Key (Contacts Rated 100A at 12V) - 61038
Narva Sealed Rocker Switch Off/On SPDT 12V Blue Illuminated Beacon Symbol (Contacts Rated 20A @ 12V) - 63147BL
Narva OE Style Sealed Push Switch Off/On SPDT 12V Blue LED Illuminated Driving Lights Symbol (Contacts Rated 3A @ 12V) - 63304BL
Narva Sealed Rocker Switch Off/On SPDT 12V Blue Illuminated Driving Lights Symbol (Contacts Rated 20A @ 12V) - 63132BL
Narva OE Style Sealed Push Switch Off/On SPDT 12V Blue LED Illuminated Light Bar Symbol (Contacts Rated 3A @ 12V) - 63302BL
1991 Nissan Primera headlights
Headlights are absolutely fitted to the 1991 Nissan Primera (P10). Factory documentation such as the Nissan Primera P10 Service Manual and Owner’s Manual list headlamp circuits, fuses, relays and bulb replacement steps, and most markets specified halogen headlamps. Regulatory standards in the vehicle’s target markets—UN ECE Regulations (e.g., R48, R112) and, for local compliance, Australian Design Rules (ADR 13/00 and ADR 46/00)—require functioning low and high beams on passenger vehicles. On that basis, headlights are relevant and standard equipment on the 1991 Primera.
On a 1991 Nissan Primera, the headlights do the heavy lifting for safe night driving and poor weather visibility. They’re designed to project a clear, well-shaped beam so the driver can see the road and be seen by others without dazzling oncoming traffic. Most P10s use halogen bulbs, with many markets running a dual‑filament type for low/high beam within the one housing. Over time, bulbs dim, plastic lenses haze, and wiring or earths can age—so a bit of upkeep goes a long way.
When servicing a Primera’s headlights, keep it simple and consistent. Replace bulbs in pairs to keep beam colour and brightness even. Handle new halogen bulbs with clean gloves to avoid skin oils shortening bulb life. If the beam looks dull or patchy, pop the rear cover and check for corrosion on connectors, loose earth points, or a tired relay. Cloudy lenses? A quality restoration kit can tidy up UV haze, if the reflector inside is peeling or the lens is cracked, replacement housings are the smarter, longer‑term fix.
Correct aim matters. If the lights seem too low or you’re getting flashed by oncoming drivers, have the alignment checked on a flat surface or by a workshop familiar with ADR/ECE aiming specs. Water droplets inside the lens usually mean a perished seal—dry the housing, reseal or replace the cap, and make sure the vent paths aren’t blocked. Finally, confirm the headlight fuse ratings match the service manual and avoid over‑wattage bulbs unless the loom has been upgraded to suit.
- Replace halogen bulbs every 2–4 years or at first sign of dimming.
- Clean lenses with plastic‑safe products, avoid harsh solvents.
- Inspect fuses, relays, and earths during routine servicing.
- Check and adjust headlight aim after suspension or tyre changes.
What bulb type fits a 1991 Nissan Primera?
Most P10 Primeras use halogen bulbs, commonly a dual‑filament style for low and high beam in one bulb. Exact fitment can vary by market and trim. The safest bet is to read the marking on the existing bulb and confirm against the owner’s manual or a reputable bulb chart before buying.
How do you adjust headlight aim on a P10 Primera?
Use the vertical and horizontal adjuster screws on the headlamp housing. Park on level ground facing a wall, set normal ride height, and adjust so the low‑beam cut‑off sits slightly below headlamp centre height at distance. For best results, a workshop can set aim to ADR/ECE specs with a beamsetter.
Why are the headlights cloudy and can they be restored?
UV exposure often hazes the plastic lens. A proper restoration kit can remove oxidation and add a UV seal. If the internal reflector is dull or the lens is cracked, replacement housings are the more reliable fix to restore brightness and beam shape.