Your Selected Vehicle
Parts for your 1990 Suzuki Swift-Headlight bulbs
OEX Mini Relay 24V Change Over 15/20A 5 Pin - Resistor Protected, Sealed - ACX1943RBL
Fitment Notes:
Narva Crimp Terminal 2 Way Male/Female Blade Connector Non Insulated 6.3mm 17Pk - 56028BL
Fitment Notes:
Explore 4WD & Adventure
OEX Rocker Switch On/Off SPST 12V Red Illuminated (Contacts Rated 10A @ 12V) - ACX3787
Fitment Notes:
OEX Voltage Drop Resistor (24V To 12V) Suits 12V Switches With Led Indicator - Pack Size (1) - ACX3912
Fitment Notes:
OEX Crimp Terminal 2-way Male/Female Red Terminal Entry 6.3 x 0.8mm Vinyl 10 Pce - ACX3011BL
Fitment Notes:
LED Autolamps 12/24V Amber Emergency Mini Light Bar 18 Selectable Flash Patterns Magnetic Mount - LB246ACMM
Fitment Notes:
LED Autolamps Stop/Tail/Indicator Diffused Tail Function With Sequential Indicator - 520ARRMB
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Fitment Notes:
Replacing and Maintaining Headlight Bulbs for Your 1990 Suzuki Swift
When it comes to ensuring the optimal performance and safety of your 1990 Suzuki Swift, one of the critical tasks is maintaining and replacing the headlight bulbs. The headlights not only light up the road ahead but also make your car visible to other drivers. Over time, headlight bulbs can become dim or completely burn out, necessitating their replacement. For the 1990 Suzuki Swift, the common type of headlight bulb used is the H4 halogen bulb, which offers both high and low beam illumination in a single bulb.
To keep your vehicle's headlights in top condition, it's vital to check the bulbs regularly and replace them as needed. Replacing headlight bulbs is relatively straightforward, even for those who aren't mechanically inclined. Before starting, make sure you have the correct replacement bulb. It's a good idea to purchase bulbs in pairs, even if only one side has gone out. This ensures consistent lighting quality and brightness on both sides of the vehicle.
- First, open the bonnet and locate the back of the headlight unit. You'll typically find it secured with clips or screws that need to be removed to access the bulb.
- Once you have access, gently twist or unclip the bulb holder to remove the old bulb. It's important to handle the bulb by its base and avoid touching the glass directly, as the oils from your skin can create hot spots on the glass, shortening the bulb's lifespan.
- Dispose of the old bulb properly and insert the new H4 bulb into the holder. Double-check that it's secured correctly and reattach any clips or screws you may have removed.
- Finally, test the new bulb to ensure it's working by turning on the headlights. If everything checks out, close the bonnet and you're good to go.
Regular maintenance of your headlights doesn't stop at replacement. It's beneficial to periodically clean the headlight lenses, as dirt and grime can reduce the effectiveness of the bulbs. Use a soft cloth and a gentle cleaner to keep them clear and bright. If you notice the lenses have become cloudy or yellowed, a headlight restoration kit can help restore their clarity.
Checking the alignment of the headlights is another essential maintenance task. Improperly aligned headlights can affect your visibility and dazzle oncoming drivers. If you suspect misalignment, it's best to consult a professional who can adjust them to the correct angle.
By staying proactive with your headlight maintenance, you ensure a safe and comfortable driving experience, regardless of the conditions. Like any other component of your vehicle, attention and care for your headlights make a significant difference in your car's overall performance. Whether it's about replacing bulbs or maintaining their clarity and alignment, keeping an eye on these aspects is a rewarding effort for any 1990 Suzuki Swift owner.