Your Selected Vehicle
Parts for your 1990 Suzuki Jimny-Headlight bulbs
Narva Rotary Battery Master / Isolation Switch (Contacts Rated 300A @ 12V) - 61082BL
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflex Reflector White Background - 150BAR
Fitment Notes:
Explore 4WD & Adventure
Repco 12V LED RearCombination Lamp Stop / Tail / Indicator / Licence Plate Pair 150x80x25mm - RLT150LBL2S3
Fitment Notes:
Narva Sealed Rocker Switch Off/On SPDT 12V Blue Illuminated Driving Lights Symbol (Contacts Rated 20A @ 12V) - 63132BL
Fitment Notes:
Drivetech 4x4 Rocker Back Up Lights Switch On/Off SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V) - DT-11014
Fitment Notes:
OEX Fuse Box, Standard Blade, 6 Way, Maximum total Amperage - 150A at 12V, Negative Busbar - ACX5123
Fitment Notes:
OEX 2 Position Pendant Switch Off - Mom On - Other (Contacts Rated 5A @ 12 or 24V) - TGL0001
Fitment Notes:
OEX 6mm Twin Core Automotive Cable, Red/Black, With Black Sheath - 5m Blister Pack (NZ Ref. 157) - ACX0811-5BL
Fitment Notes:
OEX Micro Relay 12V 30/30A 5 Pin Resistor Protected - Change Over 1 Pce - ACX1989
Fitment Notes:
OEX Crimp Terminal Female Blade Brass Terminal Entry 6.3 x 0.8mm Non Insulated 100 Pce - ACX3078
Fitment Notes:
MaxiTrac 7 Inch LED Headlight, H4 Connector, High/Low Beam, Single 12/24V - MTHL7LED
Fitment Notes:
Maintaining and Replacing Headlight Bulbs on Your 1990 Suzuki Jimny
Taking care of your 1990 Suzuki Jimny's headlight bulbs is essential for safe and efficient driving. These bulbs might seem like a minor component, but they play a significant role in ensuring visibility and safety on the road, especially during night-time driving or inclement weather. Replacing and maintaining these bulbs is a straightforward task that can be handled with a bit of care and attention.
Every vehicle's headlights have a certain lifespan, and for the 1990 Suzuki Jimny, it's crucial to notice the signs that signal it is time for a replacement. Dimming of the headlights, flickering lights, or a bulb that has completely burnt out are common indicators that you need to intervene. Here is a simple guide to replacing the headlight bulbs on your Jimny:
- Gather Your Tools: Before you begin, make sure you have the right tools. A Phillips-head screwdriver, protective gloves, and your new headlight bulbs that meet the manufacturer's specifications are necessary.
- Access the Headlight Housing: Open the bonnet of your Jimny and locate the back of the headlight assembly. In most cases, removing a few screws or clips will allow access to the bulb housing.
- Remove the Old Bulb: Carefully unplug the wiring harness from the back of the bulb. This might require a slight twist or pull, so take care not to damage the wiring.
- Install the New Bulb: Handle the new bulb with clean gloves to avoid getting oils from your skin on the glass, as this can reduce its lifespan. Align the new bulb in the socket and secure it firmly. Reattach the wiring harness.
- Test the Bulb: Before reassembling everything, test the new bulb to ensure it functions correctly. Turn on the headlights and check the beam alignment and strength.
- Reassemble the Headlight Housing: Once satisfied with the installation, fit the housing back together and secure it with screws or clips.
Regularly checking and maintaining your Jimny's headlights will ensure optimal performance and longevity. Keep an eye on both new and existing bulbs and replace them in pairs if possible to ensure symmetrical lighting and avoid uneven wear. This helps maintain a consistent appearance and performance.
Think of headlight maintenance as part of your regular vehicle servicing routine. By keeping your lights in top condition, you're not just ensuring your safety, but also enhancing the overall driving experience. With just a little bit of effort, you can keep your 1990 Suzuki Jimny shining brightly and reliably through all your adventures.