Your Selected Vehicle
Parts for your 1990 Suzuki Jimny-Headlight bulbs
LED Autolamps 90 Series Amber Emergency LED Strobe/Warning Light 12V/24V Surface Mount - 90AM
Fitment Notes:
Explore 4WD & Adventure
Narva Model 63 Front End Outline Marker, Side Indicator (Amber) Or External Cabin Marker Lamp Black Base And 0.5M Cable
Fitment Notes:
OEX 4mm Twin Core Automotive Cable, Red/Black, With Black Sheath - 5m Blister Pack (NZ Ref.153) - ACX0808-5BL
Fitment Notes:
OEX Mini Relay 12V 5 Pin Change Over 30/40A (30 & 86 terminals are reversed) Resistor Protected, Sealed - ACX1938RBL
Fitment Notes:
OEX 3mm Dual Wall Heat Shrink Polyolefin with Adhesive Tubing Black 1.2M - ACX1289L
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
Stedi Hyper LED Flood Lights 14 Inch 120W 6000K Colour 10800 Lumens - LEDHYPR-14-120W
Fitment Notes:
OEX 2mm Twin Core, Tinned Marine Cable, Red/Black with White Sheath, 100m Roll - ACX0985L
Fitment Notes:
OEX Voltage Reducer 24V To 12V - Switch Mode Single Circuit - 5A (With Memory wire for Radio) - ACX7200
Fitment Notes:
Maintaining and Replacing Headlight Bulbs on Your 1990 Suzuki Jimny
Taking care of your 1990 Suzuki Jimny's headlight bulbs is essential for safe and efficient driving. These bulbs might seem like a minor component, but they play a significant role in ensuring visibility and safety on the road, especially during night-time driving or inclement weather. Replacing and maintaining these bulbs is a straightforward task that can be handled with a bit of care and attention.
Every vehicle's headlights have a certain lifespan, and for the 1990 Suzuki Jimny, it's crucial to notice the signs that signal it is time for a replacement. Dimming of the headlights, flickering lights, or a bulb that has completely burnt out are common indicators that you need to intervene. Here is a simple guide to replacing the headlight bulbs on your Jimny:
- Gather Your Tools: Before you begin, make sure you have the right tools. A Phillips-head screwdriver, protective gloves, and your new headlight bulbs that meet the manufacturer's specifications are necessary.
- Access the Headlight Housing: Open the bonnet of your Jimny and locate the back of the headlight assembly. In most cases, removing a few screws or clips will allow access to the bulb housing.
- Remove the Old Bulb: Carefully unplug the wiring harness from the back of the bulb. This might require a slight twist or pull, so take care not to damage the wiring.
- Install the New Bulb: Handle the new bulb with clean gloves to avoid getting oils from your skin on the glass, as this can reduce its lifespan. Align the new bulb in the socket and secure it firmly. Reattach the wiring harness.
- Test the Bulb: Before reassembling everything, test the new bulb to ensure it functions correctly. Turn on the headlights and check the beam alignment and strength.
- Reassemble the Headlight Housing: Once satisfied with the installation, fit the housing back together and secure it with screws or clips.
Regularly checking and maintaining your Jimny's headlights will ensure optimal performance and longevity. Keep an eye on both new and existing bulbs and replace them in pairs if possible to ensure symmetrical lighting and avoid uneven wear. This helps maintain a consistent appearance and performance.
Think of headlight maintenance as part of your regular vehicle servicing routine. By keeping your lights in top condition, you're not just ensuring your safety, but also enhancing the overall driving experience. With just a little bit of effort, you can keep your 1990 Suzuki Jimny shining brightly and reliably through all your adventures.