Your Selected Vehicle
Parts for your 1990 Suzuki Jimny-Headlight bulbs
OEX 3mm Single Core Automotive Cable, Black With Green Trace - 30m Roll (NZ Ref.150) - ACX0714
Fitment Notes:
OEX 3mm Single Core Automotive Cable, Black With White Trace - 30m Roll (NZ Ref.150) - ACX0711
Fitment Notes:
Explore 4WD & Adventure
OEX 3mm Single Core Automotive Cable, Brown With White Trace - 30m Roll (NZ Ref.150) - ACX0715
Fitment Notes:
Drivetech 4x4 Rocker Front Diff Switch On/Off SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V) - DT-11022
Fitment Notes:
OEX 3mm Single Core Automotive Cable, Red With Blue Trace - 30m Roll (NZ Ref.150) - ACX0721
Fitment Notes:
OEX 3mm Single Core Automotive Cable, Yellow With Blue Trace - 30m Roll (NZ Ref.150) - ACX0716
Fitment Notes:
OEX 3mm Single Core Automotive Cable, Black With Pink Trace - 30m Roll (NZ Ref.150) - ACX0719
Fitment Notes:
OEX 24mm Dual Wall Heat Shrink Polyolefin with Adhesive Tubing Black 1.2M - ACX1296L
Fitment Notes:
Narva 9-33 Volt Surface Mount LED Side direction indicator(amber) with 0.5m cable - lamp only - no cover - 96840
Fitment Notes:
OEX 2mm Single Core Automotive Cable, White With Brown Trace - 50m Roll - ACX0578
Fitment Notes:
VDO Adaptor Internal Thread 1/8” - 27Nptf External Thread 3/8” - 18Nptf - 320.051
Fitment Notes:
OEX 2mm Single Core Automotive Cable, Black With Yellow Trace - 50m Roll - ACX0574
Fitment Notes:
Maintaining and Replacing Headlight Bulbs on Your 1990 Suzuki Jimny
Taking care of your 1990 Suzuki Jimny's headlight bulbs is essential for safe and efficient driving. These bulbs might seem like a minor component, but they play a significant role in ensuring visibility and safety on the road, especially during night-time driving or inclement weather. Replacing and maintaining these bulbs is a straightforward task that can be handled with a bit of care and attention.
Every vehicle's headlights have a certain lifespan, and for the 1990 Suzuki Jimny, it's crucial to notice the signs that signal it is time for a replacement. Dimming of the headlights, flickering lights, or a bulb that has completely burnt out are common indicators that you need to intervene. Here is a simple guide to replacing the headlight bulbs on your Jimny:
- Gather Your Tools: Before you begin, make sure you have the right tools. A Phillips-head screwdriver, protective gloves, and your new headlight bulbs that meet the manufacturer's specifications are necessary.
- Access the Headlight Housing: Open the bonnet of your Jimny and locate the back of the headlight assembly. In most cases, removing a few screws or clips will allow access to the bulb housing.
- Remove the Old Bulb: Carefully unplug the wiring harness from the back of the bulb. This might require a slight twist or pull, so take care not to damage the wiring.
- Install the New Bulb: Handle the new bulb with clean gloves to avoid getting oils from your skin on the glass, as this can reduce its lifespan. Align the new bulb in the socket and secure it firmly. Reattach the wiring harness.
- Test the Bulb: Before reassembling everything, test the new bulb to ensure it functions correctly. Turn on the headlights and check the beam alignment and strength.
- Reassemble the Headlight Housing: Once satisfied with the installation, fit the housing back together and secure it with screws or clips.
Regularly checking and maintaining your Jimny's headlights will ensure optimal performance and longevity. Keep an eye on both new and existing bulbs and replace them in pairs if possible to ensure symmetrical lighting and avoid uneven wear. This helps maintain a consistent appearance and performance.
Think of headlight maintenance as part of your regular vehicle servicing routine. By keeping your lights in top condition, you're not just ensuring your safety, but also enhancing the overall driving experience. With just a little bit of effort, you can keep your 1990 Suzuki Jimny shining brightly and reliably through all your adventures.