Your Selected Vehicle
Parts for your 1990 Nissan Primera-Headlights
Narva MDL34 Stop/Tail/Indicator Light With Licence Plate Lamp LED 12V - 2 Pce - 93440BL2
Explore 4WD & Adventure
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Narva 9-33 Volt Surface Mount LED front end outline marker(white) with Chrome cover and 0.5m cable and Deutsch connector - 96812-D
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable - 97010-1
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97000-1/4
Narva Model 63 Front End Outline Marker, Side Indicator (Amber) Or External Cabin Marker Lamp Black Base And 0.5M Cable
Narva 9-33 Volt Surface Mount LED rear end outline marker lamp(red) with Black cover and 0.5m cable - 96832B
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
1990 Nissan Primera Headlights — What They Do and How to Look After Them
Headlights are absolutely relevant and factory-fitted on the 1990 Nissan Primera (P10). This is documented in the Nissan Primera P10 Service Manual (EL—Lighting System, 1990–1992), the Nissan FAST/EPC parts catalogue for P10 headlamp assemblies, and the Primera Owner’s Manual listings for bulb specifications. Compliance frameworks like UN ECE R48 and Australia/New Zealand’s ADR 13/00 also mandate dipped- and main-beam headlamps. Most RHD EU/NZ P10 variants run halogen H4 60/55 W dual‑filament bulbs in reflector housings.
On a 1990 Primera, the headlights are there to light the road ahead and to make the car visible to everyone else. Low beam gives a controlled, left‑biased pattern for RHD markets, keeping glare down for oncoming traffic. High beam pushes extra reach for rural roads and open highways. Good, clear headlights reduce fatigue, shorten reaction times, and help the Primera feel safe and confidence‑inspiring at night.
As part of regular servicing, it pays to check performance and condition. Lenses can haze with UV, bulbs slowly dim with age, and poor earths or tired relays can sap brightness. Keep wattage to the specified 60/55 W to avoid cooking the housing or overloading wiring. If one globe blows, replace both so brightness stays matched. After any front‑end work or housing swap, a quick alignment check is a must for legal compliance and decent visibility.
DIY replacement is straightforward on most P10 trims:
- Switch off lights and let everything cool. Wear clean gloves.
- Reach behind the headlight, unplug the 3‑pin connector, peel back the rubber boot, and unclip the spring retainer.
- Fit the new H4 globe without touching the glass, reclip, refit the boot, and reconnect.
- Test low and high beam, then check aim on a flat surface.
Care tips that keep the Primera’s headlights bright:
- Wash lenses with pH‑neutral car shampoo, avoid harsh abrasives.
- Restore yellowed plastic with a UV restoration kit and reapply a UV sealant.
- Inspect for moisture, replace damaged caps/seals and clear blocked vents.
- Check fuses, the headlight relay, and earth points if output looks weak.
- Be cautious with LED “retrofit” bulbs—most aren’t road‑legal in halogen reflector housings in AU/NZ unless the entire lamp assembly is certified.
Popular questions about 1990 Nissan Primera headlights
What bulb type does a 1990 Primera use?
Most RHD EU/NZ 1990 Primera (P10) models use H4 60/55 W halogen dual‑filament bulbs. Variations can exist across trims and markets, so checking the owner’s manual, the marking on the lamp, or the vehicle’s VIN in the Nissan EPC is a smart move before buying.
Are LED headlight conversions legal on a P10 Primera?
Generally no, not in standard halogen reflector housings. In AU/NZ, legality typically requires an ADR/ECE‑approved complete lamp. Many drop‑in LED bulbs are for off‑road use only. If brighter output is the goal, choose premium E‑marked halogen globes and ensure the wiring and aim are spot on.
How do I fix headlight condensation?
A light mist after heavy rain can be normal and clears as the lamp warms. Persistent fogging points to a leaking seal, missing rear cap, or blocked vent. Dry the housing, reseal the perimeter gasket if needed, replace damaged caps, and consider a small desiccant pack behind the service cap to keep moisture at bay.