Your Selected Vehicle
Parts for your 1989 Toyota Hilux surf-Headlight bulbs
OEX 2 B&S Battery Lead, Post to Stud, Length - 1,220mm, Stud Hole - 10mm - ACX1015
Fitment Notes:
Explore 4WD & Adventure
Narva Sealed Rocker Switch Off/Momentary On SPST 12V Amber Illuminated (Contacts Rated 20A @ 12V) - 63126BL
Fitment Notes:
OEX 2.5mm 5 Core Trailer Cable, With Black Sheath - 6m Blister Pack (NZ Ref.205) - ACX0820-6BL
Fitment Notes:
OEX Crimp Terminal Female Blade Yellow Terminal Entry 9.5 x 1.2mm Vinyl 10 Pce - ACX3020BL
Fitment Notes:
OEX 4mm Twin Core Automotive Cable, Red/Black, With Black Sheath - 5m Blister Pack (NZ Ref.153) - ACX0808-5BL
Fitment Notes:
Narva Heavy Duty Push Button Switch Momentary On SPST (Contacts Rated 60A @ 12V) - 60033BL
Fitment Notes:
Maintaining Your 1989 Toyota Hilux Surf Headlight Bulbs
Owning a 1989 Toyota Hilux Surf is like having a piece of automotive history at your fingertips. It's a vehicle renowned for its durability and reliability, making it a beloved choice for many enthusiasts. Part of keeping this classic vehicle roadworthy involves paying attention to some of its crucial components, like the headlight bulbs. Proper maintenance of your headlight bulbs ensures optimal visibility and safety during night drives or in low-light conditions.
Changing your Hilux Surf's headlight bulbs is a straightforward task that can often be done with a few tools and some patience. First, make sure you have the correct replacement bulb type. For a 1989 Toyota Hilux Surf, it usually requires a sealed beam type bulb, commonly H6054 or similar, depending on the specific trim and configuration of your Surf.
- Start by making sure your vehicle is parked on a level surface with the engine turned off and the ignition key removed. Safety first!
- Open the bonnet to access the headlamp assembly. Depending on your vehicle's configuration, you may need to remove certain components or covers to reach the back of the headlight assembly.
- Once you have access, unplug the electrical connector from the back of the headlight. Be gentle to avoid damaging the connector or wires.
- Usually, there will be a retaining ring or screws holding the bulb in place. Loosen these to carefully remove the old bulb. Take note of how it's positioned before removal.
- Fit the new bulb in the same position as the old one, making sure it's secured by the retaining mechanisms.
- Reconnect the electrical connector, ensuring it's tightly attached, and any covers or components you may have removed are reassembled.
Headlight bulbs don't just need replacing, they also need occasional cleaning. Road grime, bugs, and other debris can accumulate on the lens, reducing the efficiency of both the low and high beams. Regularly clean the headlight lens with a mild detergent solution and a gentle cloth or sponge. This will improve clarity and allow maximum light to pass through.
In addition to bulb replacement and cleaning, it's wise to check the alignment of your headlights from time to time. Proper alignment ensures that your lights illuminate the road ahead properly without blinding oncoming drivers. Misaligned headlights can cause uneven lighting and present a safety hazard.
When replacing headlight bulbs, consider doing both at the same time as they often age at the same rate. Carry a spare bulb in your vehicle, it's a quick fix that can save you from unexpected trouble on the road.
Looking after these essential features will keep your 1989 Toyota Hilux Surf running safely and reliably, making sure it's ready for any adventure you have in store.