Your Selected Vehicle
Parts for your 1989 Suzuki Jimny-Tail lights
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
Fitment Notes:
LED Autolamps 12/24V 16 LED Stop/Tail Indicator Lamp Black Bracket Blister Pack - 201BSTIM
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
LED Autolamps 174 Series Stop/Tail/Indicator Lamp 12/24V, Surface Mount, 40cm Cable - 174ARMB
Fitment Notes:
Narva 9 - 33 Volt LED Rear Stop/Tail And Direction Indicator Lamp Kit (Red/Amber) - 94526
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp With Reflex Reflectors Grey Base Blister Pack 1 pce - 100ARM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Assembly With 4 Lamps - 80BARRWM
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
Fitment Notes:
Hella DuraLED Combi-S Heavy Duty 12/24V LED Stop/Tail/Indicator Lamp with6M Lead - 23786MBULK
Fitment Notes:
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflex Reflector 2 Pack - 151BAR2
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp Black Bracket With 40cm Wire - 80BSTIM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
Fitment Notes:
Narva 9-33 Volt L.E.D Reverse Lamp White with Red L.E.D Tail Ring and Black Base - 94312
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Flood Pattern 4 LED Work Light - LEDWORK-C4-FLOOD
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Fitment Notes:
Repco Wireless 1.5M Trailer Board With Rear Combination Lights 20 Metre Range - RTBW
Fitment Notes:
Repco 12-24V LED Rear Combination Lamp Stop/Tail/Ind/Rev 100X275X22mm - RLT275STIR
Fitment Notes:
Tail Lights Maintenance and Replacement for Your 1989 Suzuki Jimny
The tail lights on your 1989 Suzuki Jimny are an essential component, ensuring your vehicle is visible to other road users, particularly during night driving or adverse weather conditions. As part of the service routine for your Jimny, it's important to pay attention to the condition and functionality of the tail lights to maintain safety and compliance with road regulations.
Tail lights are not just about aesthetics, they are crucial for signaling to drivers behind you. A properly functioning tail light assembly includes brake lights, reverse lights, and sometimes, indicators. Here's a simple guide to help you with the maintenance or replacement of these critical lights on your Jimny.
- Inspection: Regularly inspect your tail lights. Check for any signs of moisture, which may indicate a seal failure, or cracks in the lens that could allow water ingress. Such issues could lead to malfunction or complete failure. If you notice any damage, it's time to consider replacement.
- Bulb Replacement: If a tail light bulb has burnt out, replace it immediately. Most tail lights on the 1989 Suzuki Jimny use simple bulbs that you can replace yourself with basic tools. Ensure you have the correct bulb type by checking the vehicle manual or consulting with a trusted parts supplier.
- Wiring and Connection Check: If a new bulb doesn't solve the problem, inspect the wiring and connections. Corroded or loose connectors can cause intermittent faults. Clean any corrosion with an electrical contact cleaner and tighten connections if necessary.
- Assembly Replacement: If the housing or lens is damaged, replacement might be necessary. Older vehicles like the Jimny may have harder-to-find parts, so sourcing replacements might require a bit of patience. To replace the assembly, remove the screws or bolts securing it, disconnect the wiring harness, and then install the new unit, ensuring a secure fit.
Keeping your tail lights clean will also improve their effectiveness. Regularly wipe them down with a soft cloth and mild soap, especially during winter months when road grime can quickly build up. This not only keeps them functioning well but also makes them last longer.
Handling your Suzuki Jimny's tail lights with care and attention can prevent minor issues from becoming costly repairs. Ensure these essential components are part of your regular vehicle maintenance checklist. If you encounter persistent problems, consulting with a professional mechanic could save time and prevent further complications.