Your Selected Vehicle
Parts for your 1989 Suzuki Jimny-Tail lights
LED Autolamps 12V LED Boat Trailer Lamps Stop/Tail/Indicator with Licence Plate Lamp Light Left & Right Side, with 8m cable, Twin Blister - 209GARLP2/8M
Fitment Notes:
LED Autolamps 12/24V LED Stop/Tail/Indicator/Licence LED Light With 4 Pin Plug - 99ARLM4P
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12/24V Stop/Tail/Indicator Light Clear Lens Coloured LEDs Surface Mount - 12ARM-2
Fitment Notes:
LED Autolamps 12/24V LED MaxiLamp Stop/Tail/Indicator/Reflector Light Round Blister Pack - MAXILAMP1XC
Fitment Notes:
LED Autolamps 12/24V 280 Mini Jumbo Stop/Tail/Indicator/Reverse LED Light Blister Pack - 280ARWM
Fitment Notes:
LED Autolamps 12/24V Round Stop/Tail Lamp With Clear Lens 130mm Diameter Recessed Mount Blister Pack - 102RCM
Fitment Notes:
LED Autolamps 12/24V LED Rear Combination Stop/Tail/Indicator/Reverse Light with Reflectors, Blister Pack - 250ARWM
Fitment Notes:
LED Autolamps 12/24V LED Stop/Tail Lamp With Red Lens Round With Grommet/Plug - 113RMG
Fitment Notes:
LED Autolamps 12/24V LED Stop/Tail/Indicator/Reflector Light 28cm Cable Blister Pack - 275MAR
Fitment Notes:
LED Autolamps 12V Stop/Tail/Ind/Rev LED Light Kit 450mm Loom DT04 Connector - SO282ARWM2LR450
Fitment Notes:
Hella DuraLED 12/24V LED Rear Stop/Tail Lamp, Horizontal/Vertical Mount - 2330BULK
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Assembly Light With Black Bracket - 80BAR
Fitment Notes:
Tail Lights Maintenance and Replacement for Your 1989 Suzuki Jimny
The tail lights on your 1989 Suzuki Jimny are an essential component, ensuring your vehicle is visible to other road users, particularly during night driving or adverse weather conditions. As part of the service routine for your Jimny, it's important to pay attention to the condition and functionality of the tail lights to maintain safety and compliance with road regulations.
Tail lights are not just about aesthetics, they are crucial for signaling to drivers behind you. A properly functioning tail light assembly includes brake lights, reverse lights, and sometimes, indicators. Here's a simple guide to help you with the maintenance or replacement of these critical lights on your Jimny.
- Inspection: Regularly inspect your tail lights. Check for any signs of moisture, which may indicate a seal failure, or cracks in the lens that could allow water ingress. Such issues could lead to malfunction or complete failure. If you notice any damage, it's time to consider replacement.
- Bulb Replacement: If a tail light bulb has burnt out, replace it immediately. Most tail lights on the 1989 Suzuki Jimny use simple bulbs that you can replace yourself with basic tools. Ensure you have the correct bulb type by checking the vehicle manual or consulting with a trusted parts supplier.
- Wiring and Connection Check: If a new bulb doesn't solve the problem, inspect the wiring and connections. Corroded or loose connectors can cause intermittent faults. Clean any corrosion with an electrical contact cleaner and tighten connections if necessary.
- Assembly Replacement: If the housing or lens is damaged, replacement might be necessary. Older vehicles like the Jimny may have harder-to-find parts, so sourcing replacements might require a bit of patience. To replace the assembly, remove the screws or bolts securing it, disconnect the wiring harness, and then install the new unit, ensuring a secure fit.
Keeping your tail lights clean will also improve their effectiveness. Regularly wipe them down with a soft cloth and mild soap, especially during winter months when road grime can quickly build up. This not only keeps them functioning well but also makes them last longer.
Handling your Suzuki Jimny's tail lights with care and attention can prevent minor issues from becoming costly repairs. Ensure these essential components are part of your regular vehicle maintenance checklist. If you encounter persistent problems, consulting with a professional mechanic could save time and prevent further complications.