Your Selected Vehicle
Parts for your 1989 Suzuki Jimny-Headlights
Explore 4WD & Adventure
OEX Voltage Reducer 24V To 12V - Switch Mode Single Circuit - 10A (With Memory wire for Radio) - ACX7204
Fitment Notes:
LED Autolamps 12/24V LED Rear Combination Stop/Tail/Indicator/Reverse Light with Reflectors, Blister Pack - 250ARWM
Fitment Notes:
OEX Integrated Flood Work Light / Amber Warning Light / Reverse Light 12V/24V SAE Class 1 - ACX5587
Fitment Notes:
LED Autolamps 8 Metre Boat Trailer Cable Tinned Copper Wiring And Side Marker/Licence Plate Light Connectors - BC800
Fitment Notes:
Narva Sealed Metal Toggle Switch Off/On SPST (Contacts Rated 20A @ 12V) - 60070BL
Fitment Notes:
Narva Sealed Rocker Switch Off/On SPST 12V Blue Illuminated (Contacts Rated 20A @ 12V) - 63123BL
Fitment Notes:
OEX Mini Relay 12V 4 Pin Normally Open 40A (30 & 86 terminals are reversed) Resistor Protected, Sealed - ACX1966RBL
Fitment Notes:
OEX Rocker Switch On/Off SPST 12V Blue Illuminated (Contacts Rated 10A @ 12V) - ACX3788
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Fitment Notes:
Maintaining and Replacing Headlights on Your 1989 Suzuki Jimny
The 1989 Suzuki Jimny is a classic little off-roader that packs a punch with its rugged charm and reliable performance. A key part of keeping this vehicle roadworthy and safe is ensuring that its headlights are in top condition. Let's take a look at some helpful tips and considerations for replacing and maintaining the headlights on your 1989 Suzuki Jimny.
Headlights are crucial components providing visibility during night-time driving and in poor weather conditions. If you've noticed your headlights have dimmed or have stopped working altogether, it may be time to replace them. This process, while generally straightforward, requires careful attention to detail to ensure your Jimny's lights function optimally. The headlights on the 1989 Suzuki Jimny are typically sealed beam units which may need whole-unit replacement, unlike modern vehicles that only require bulb changes. Here are some steps and tips to guide you:
- Gather the Right Tools and Parts: Before starting, ensure you have the correct replacement sealed beam headlights specific to the 1989 Jimny model. Having a screwdriver and gloves will also ease the process.
- Removing the Existing Headlights: Carefully remove any screws or clips surrounding the headlight assembly. This usually involves taking off the front grille or trim pieces to expose the housing. Handle these components gently to avoid causing any unintentional damage.
- Disconnect the Wiring: Once the housing is accessible, gently disconnect the wiring harness from the back of the headlight. Make sure not to tug too hard which might damage the wires.
- Replace the Headlight: Remove the old headlight from the housing and fit the new sealed beam unit securely. Reconnect the wiring harness, making sure it clicks back into place firmly.
- Reassemble the Headlight Housing: Once the new headlight is secured, reattach any trim or grille pieces you removed earlier. Tighten any screws cautiously to ensure a firm fit.
While replacing headlights might seem daunting at first, regular maintenance is fairly straightforward. Make it a point to check your headlights periodically:
- Ensure that the lenses are clean and free of scratches or clouding which can affect light projection.
- Check for any moisture inside the headlight housing to prevent corrosion or electrical issues.
- Verify that the headlights are aligned correctly, as misalignment can reduce road visibility and dazzle oncoming traffic.