Your Selected Vehicle
Parts for your 1987 Suzuki Swift-Headlight bulbs
Narva MDL34 Stop/Tail/Indicator Light With Licence Plate Lamp LED 12V - 2 Pce - 93440BL2
Fitment Notes:
Hella Ignition Switch Acc - Off - Acc/Ign - Start (Contacts Rated 25A @ 12V) - 4008
Fitment Notes:
Narva Nissan Style Sealed Push Switch Off/On SPDT 12V Blue LED Illuminated Driving Lights Symbol (Contacts Rated 3A @ 12V) - 63376BL
Fitment Notes:
OEX Mini Battery Master / Isolation Switch SPST (Contacts Rated 100A @ 32V) - ACX3401BL
Fitment Notes:
Explore 4WD & Adventure
OEX Rocker Switch On/Off SPST 12V Green Illuminated (Contacts Rated 10A @ 12V) - ACX3790
Fitment Notes:
OEX 3mm Dual Wall Heat Shrink Polyolefin with Adhesive Tubing Black 1.2M - ACX1289L
Fitment Notes:
Narva Sealed Metal Toggle Switch Off/On SPST (Contacts Rated 20A @ 12V) - 60070BL
Fitment Notes:
OEX Crimp Terminal Joiner Red Cable Size 2.5-3mm Heat Shrinkable 50 Pce - ACX3064
Fitment Notes:
Narva OE Style Sealed Push Switch Off/On SPDT 12V Blue LED Illuminated LED Light Bar Symbol (Contacts Rated 3A 12V) - 63314BL
Fitment Notes:
Icon Heavy Duty Battery Terminal Hex Bolt Clamp Style M10 Negative 1 Piece - BT19-10NEG
Fitment Notes:
OEX Crimp Terminal 2-way Male/Female Blue Terminal Entry 6.3 x 0.8mm Vinyl 10 Pce - ACX3012BL
Fitment Notes:
Hella Toggle Switch On/Off/On Spdt 12V Green Illuminated (Contacts Rated 15A @ 12V) - 4206
Fitment Notes:
Headlight Bulb Replacement and Maintenance for the 1987 Suzuki Swift
When it comes to the 1987 Suzuki Swift, keeping your headlight bulbs in top-notch condition is crucial for maintaining optimal visibility and safety on the road. While the specifics of headlight bulb type for this vehicle can vary slightly, it generally uses a standard halogen bulb. For longevity and performance, it's important to regularly check and maintain these bulbs. Here's a simple guide on how to go about it.
Maintaining your headlight bulbs is relatively straightforward but requires a diligent approach. Start with regular inspections. Every so often, take a few minutes to do a walkaround of your car and test the headlights. Look out for any flickering, dimness, or complete failure, which could indicate the bulbs are on their way out. Addressing these issues promptly is essential as driving with faulty headlights can significantly reduce night-time visibility and may result in fines or penalties if caught.
If you find that a bulb needs replacing, the process is generally uncomplicated. Here's what you need to do:
- Turn off your engine and ensure the lights are switched off. For safety reasons, it's best to disconnect the battery.
- Access the bulb by opening the bonnet. Look for the back of the headlight assembly where you'll find the bulb holder.
- Carefully disconnect the wiring harness from the bulb holder. Be gentle to avoid damaging the connectors.
- Remove the old bulb by twisting it counterclockwise and pulling it out of the socket.
- Insert the new bulb by aligning it properly within the socket, then twist it clockwise to secure it in place.
- Reconnect the wiring harness, ensuring a snug fit to avoid connectivity issues.
- Test your new headlight bulb by turning on the engine and ensuring the beam is correctly aligned and functioning as expected.
If alignment is off, you may need to adjust the headlight housing slightly. Misalignment can cause poor visibility and may dazzle other drivers, so ensure the beam is directed correctly.
It's wise to replace both headlights simultaneously even if only one has failed. This ensures even illumination and prevents you from having to go through the process again shortly thereafter. Keep a spare set of bulbs in your vehicle, just in case one fails unexpectedly.
Using quality bulbs is key, they tend to last longer and offer better illumination. While it might be tempting to opt for the cheaper options, investing in a good set will pay off in the long run.
A little regular maintenance and attention to your headlights can ensure you enjoy safe and stress-free driving in your 1987 Suzuki Swift. Happy driving!