Your Selected Vehicle
Parts for your 1987 Suzuki Swift-Headlight bulbs
Amphenol 50A Genuine Heavy-Duty Power Connector, Grey - 1 Pair with Terminals - AXC508H6-2
Fitment Notes:
OEX Crimp Terminal Male Blade Yellow Terminal Entry 6.3 x 0.8mm Vinyl 50 Pce - ACX3008
Fitment Notes:
OEX Crimp Terminal Male Blade Yellow Terminal Entry 6.3 x 0.8mm Nylon 50 Pce - ACX3002
Fitment Notes:
Explore 4WD & Adventure
OEX Crimp Terminal Female Blade Yellow Terminal Entry 6.3 x 0.8mm Vinyl 50 Pce - ACX3026
Fitment Notes:
Amphenol 50A Genuine Heavy-Duty Power Connector, Black - 1 Pair with Terminals - AXC500H6-2
Fitment Notes:
OEX Crimp Terminal Female Blade Yellow Terminal Entry 9.5 x 1.2mm Vinyl 50 Pce - ACX3020
Fitment Notes:
Amphenol 50A Genuine Heavy-Duty Power Connector, Red - 1 Pair with Terminals - AXC502H6-2
Fitment Notes:
OEX Crimp Terminal Male Blade Red Terminal Entry 3.2 x 0.8mm Vinyl 100 Pce - ACX3105
Fitment Notes:
OEX Crimp Terminal Female Blade Red Terminal Entry 5 x 0.8mm Vinyl 100 Pce - ACX3015
Fitment Notes:
OEX Crimp Terminal Female Blade Yellow Terminal Entry 6.3 x 0.8mm Vinyl 50 Pce - ACX3019
Fitment Notes:
OEX Crimp Terminal Male Blade Red Terminal Entry 6.3 x 0.8mm Nylon 50 Pce - ACX3000
Fitment Notes:
Headlight Bulb Replacement and Maintenance for the 1987 Suzuki Swift
When it comes to the 1987 Suzuki Swift, keeping your headlight bulbs in top-notch condition is crucial for maintaining optimal visibility and safety on the road. While the specifics of headlight bulb type for this vehicle can vary slightly, it generally uses a standard halogen bulb. For longevity and performance, it's important to regularly check and maintain these bulbs. Here's a simple guide on how to go about it.
Maintaining your headlight bulbs is relatively straightforward but requires a diligent approach. Start with regular inspections. Every so often, take a few minutes to do a walkaround of your car and test the headlights. Look out for any flickering, dimness, or complete failure, which could indicate the bulbs are on their way out. Addressing these issues promptly is essential as driving with faulty headlights can significantly reduce night-time visibility and may result in fines or penalties if caught.
If you find that a bulb needs replacing, the process is generally uncomplicated. Here's what you need to do:
- Turn off your engine and ensure the lights are switched off. For safety reasons, it's best to disconnect the battery.
- Access the bulb by opening the bonnet. Look for the back of the headlight assembly where you'll find the bulb holder.
- Carefully disconnect the wiring harness from the bulb holder. Be gentle to avoid damaging the connectors.
- Remove the old bulb by twisting it counterclockwise and pulling it out of the socket.
- Insert the new bulb by aligning it properly within the socket, then twist it clockwise to secure it in place.
- Reconnect the wiring harness, ensuring a snug fit to avoid connectivity issues.
- Test your new headlight bulb by turning on the engine and ensuring the beam is correctly aligned and functioning as expected.
If alignment is off, you may need to adjust the headlight housing slightly. Misalignment can cause poor visibility and may dazzle other drivers, so ensure the beam is directed correctly.
It's wise to replace both headlights simultaneously even if only one has failed. This ensures even illumination and prevents you from having to go through the process again shortly thereafter. Keep a spare set of bulbs in your vehicle, just in case one fails unexpectedly.
Using quality bulbs is key, they tend to last longer and offer better illumination. While it might be tempting to opt for the cheaper options, investing in a good set will pay off in the long run.
A little regular maintenance and attention to your headlights can ensure you enjoy safe and stress-free driving in your 1987 Suzuki Swift. Happy driving!