Your Selected Vehicle
Parts for your 1987 Suzuki Swift-Headlight bulbs
NARVA P21/5W Bayonet BAY15d Premium Long Life Globe 12V 21/5W - 17916BL
Fitment Notes:
Explore 4WD & Adventure
Stedi Driving Light Wiring Harness 60A Dual Connector Plug and Play - WIRQKFT-SMART
Fitment Notes:
Narva H4 Headlight Bulb 12V 60/55W P43T Plus200 Twin Pack - 48392BL2
Fitment Notes:
Stedi ST3301 4.6 inch 2 LED Work Light Flood Refectors 45 Degree Beam - LED3301-PRO-2L
Fitment Notes:
Narva T-10mm W5W Premium Wedge Globe W2.1 X 9.5D 12V 5W Single Blister Pack - 17177BL
Fitment Notes:
OEX Mini Relay 12V 4 Pin Normally Open 40A - Resistor Protected, Sealed - ACX1939RBL
Fitment Notes:
OEX Standard Blade In Line Fuse Holder, Red, 1 Way, 35A - Single Pack - ACX1711RBL
Fitment Notes:
Narva H4 Headlight Bulb 12V 60/55W Sapphire Plus 50 2 Pce - 48522BL2
Fitment Notes:
Narva H4 Headlight Bulb 12/24V LED GEN III Conversion Kit Twin Pack - 18444
Fitment Notes:
Narva H4 Headlight Bulb P43T 38 Intense Blue Globe 12V 60/55W - 48472BL
Fitment Notes:
Headlight Bulb Replacement and Maintenance for the 1987 Suzuki Swift
When it comes to the 1987 Suzuki Swift, keeping your headlight bulbs in top-notch condition is crucial for maintaining optimal visibility and safety on the road. While the specifics of headlight bulb type for this vehicle can vary slightly, it generally uses a standard halogen bulb. For longevity and performance, it's important to regularly check and maintain these bulbs. Here's a simple guide on how to go about it.
Maintaining your headlight bulbs is relatively straightforward but requires a diligent approach. Start with regular inspections. Every so often, take a few minutes to do a walkaround of your car and test the headlights. Look out for any flickering, dimness, or complete failure, which could indicate the bulbs are on their way out. Addressing these issues promptly is essential as driving with faulty headlights can significantly reduce night-time visibility and may result in fines or penalties if caught.
If you find that a bulb needs replacing, the process is generally uncomplicated. Here's what you need to do:
- Turn off your engine and ensure the lights are switched off. For safety reasons, it's best to disconnect the battery.
- Access the bulb by opening the bonnet. Look for the back of the headlight assembly where you'll find the bulb holder.
- Carefully disconnect the wiring harness from the bulb holder. Be gentle to avoid damaging the connectors.
- Remove the old bulb by twisting it counterclockwise and pulling it out of the socket.
- Insert the new bulb by aligning it properly within the socket, then twist it clockwise to secure it in place.
- Reconnect the wiring harness, ensuring a snug fit to avoid connectivity issues.
- Test your new headlight bulb by turning on the engine and ensuring the beam is correctly aligned and functioning as expected.
If alignment is off, you may need to adjust the headlight housing slightly. Misalignment can cause poor visibility and may dazzle other drivers, so ensure the beam is directed correctly.
It's wise to replace both headlights simultaneously even if only one has failed. This ensures even illumination and prevents you from having to go through the process again shortly thereafter. Keep a spare set of bulbs in your vehicle, just in case one fails unexpectedly.
Using quality bulbs is key, they tend to last longer and offer better illumination. While it might be tempting to opt for the cheaper options, investing in a good set will pay off in the long run.
A little regular maintenance and attention to your headlights can ensure you enjoy safe and stress-free driving in your 1987 Suzuki Swift. Happy driving!