Your Selected Vehicle
Parts for your 1986 Mitsubishi Pajero-Headlight bulbs
Explore 4WD & Adventure
Narva Crimp Terminal Female Blade Yellow Terminal Entry 6.3 x 0.8mm Heat Shrinkable 50 Pce - 56332
Fitment Notes:
Narva Sealed Rocker Switch Off/Momentary On SPST 12/24V Red LED (Contacts Rated 20A @ 12V) - 63164BL
Fitment Notes:
OEX 3mm Twin Core Automotive Cable, Figure 8, Blue With White Trace - 30m Roll (NZ Ref.151) - ACX0830
Fitment Notes:
OEX 2.5mm Single Core Automotive Cable, Yellow - 100m Roll (NZ Ref.148) - ACX0697L
Fitment Notes:
OEX 3mm Twin Core Automotive Cable, Figure 8, Brown With White Trace - 30m Roll (NZ Ref.151) - ACX0803
Fitment Notes:
Narva Push Button Switch Off/On SPST Red LED (Contacts Rated 10A @ 15V) - 60076BL
Fitment Notes:
Maintaining and Replacing Headlight Bulbs on Your 1986 Mitsubishi Pajero
Owning a classic like the 1986 Mitsubishi Pajero is a rewarding experience, but it also means staying on top of maintenance tasks to ensure everything runs smoothly. An often overlooked component in your vehicle's maintenance routine is the headlight bulbs. Ensuring these bulbs are in good working condition not only keeps you safe on the road but also keeps your Pajero looking sharp.
When it comes time to replace the headlight bulbs, there are a few things you should keep in mind:
- Understand the Type: The 1986 Mitsubishi Pajero generally uses sealed beam headlights, which means you'd generally replace the entire unit rather than just a bulb. However, a variety of halogen bulbs like H4 are often compatible with this model if conversions have been done.
- Signs of Wear: Notice any dimming, flickering, or complete failure of a headlight? It's time to inspect and likely replace your headlights. Regularly check for any cloudiness or discolouration of the lens, as this can impact visibility.
- Tools Required: Be prepared with a basic set of tools like screwdrivers and a socket set to remove any housings or panels. Always consult your vehicle's manual if you're unsure about part removal.
Replacing the bulbs in your Pajero can be done with a bit of patience and care. Here's a simple guide to follow:
- Turn off the engine and remove the key from the ignition to ensure safety.
- Locate the headlight assembly. Depending on your model's configuration, you might need to remove components like the grill. Make sure to keep all screws and clips in a safe place.
- If your Pajero uses a sealed beam headlight, you will need to replace the entire sealed beam unit. Otherwise, for models with halogen bulbs, carefully twist and remove the old bulb from the housing.
- Handle the new bulb with care. Avoid touching the glass with your bare hands, as oils from your skin can shorten the lifespan of the bulb.
- Securely install the new bulb or sealed beam, ensuring all connections are tight.
- Test the headlights before reassembling any removed parts. Make adjustments if necessary to ensure they are properly aligned.
Regular maintenance of the headlight system involves more than just replacing bulbs. Keep the headlight lenses clean to maximise visibility. It's also wise to periodically check the electrical connections for any signs of corrosion or wear.
Keeping your headlight system in top shape ensures that your 1986 Mitsubishi Pajero remains roadworthy and safe. With just a small amount of effort and time, you can maintain the classic charm of your vehicle while ensuring a reliable drive in all conditions.