Your Selected Vehicle
Parts for your 1985 Suzuki Swift-Tail lights
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIMCSB
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIMB
LED Autolamps 8 Metre Boat Trailer Cable Tinned Copper Wiring And Side Marker/Licence Plate Light Connectors - BC800
LED Autolamps 12/24V Reverse Lamp Horizontal/Vertical Mount Twin Blister - 11WM-2
LED Autolamps Twin Function Stalk Side Indicator With Red/Amber Side Marker LHS Multivolt - 805ARIML
LED Autolamps 174 Series Rear Indicator Lamp 12/24V, Surface Mount, 40cm Cable - 174AMB
LED Autolamps Twin Function Stalk Side Indicator With Red/Amber Side Marker RHS Multivolt - 805ARIMR
LED Autolamps 12/24V Reversing Lamp With 25 White LEDs With Bracket and 30cm Wire - 100WM
LED Autolamps Licence Plate Lamp Black Bracket Multi Volt With 1m Cable - 35BLM1P
LED Autolamps 10/30V Front Outline Position Marker With 2 White LED Blister Pack - 58WM
LED Autolamps 12V Front Indicator Amber Lens Black Base Twin Blister Pack - 175A/2
Maintaining and Replacing Tail Lights on a 1985 Suzuki Swift
The tail lights on a 1985 Suzuki Swift are essential to its functionality, not just for illumination but also for safety. If your tail lights are acting up, it's important to address the issue promptly to ensure you're visible on the roads, especially during those night drives.
Firstly, understanding the role of tail lights is crucial. They illuminate the rear of your vehicle, helping others see you in low visibility conditions. They also house the brake lights, which signal to others when you're slowing down or stopping. Keep these lights in top condition to maintain safety.
When the tail lights start to flicker, aren't as bright as they should be, or fail to work entirely, it's time to check them out. One of the usual suspects is a blown-out bulb, and this can be a straightforward fix. Many drivers can replace these on their own. Here's a simple guide to help you through the process:
- Start by gathering your tools. You'll need a screwdriver and a pair of gloves to protect your hands from sharp edges.
- Open the boot and locate the access panel behind the tail lights. You'll often find screws or clips that need unscrewing or unclipping to access the bulb holders.
- Remove the holder by twisting it counter-clockwise and gently pulling it out. This will expose the bulb.
- Remove the bulb. If it looks burnt or the filament is broken, it's definitely time for a replacement.
- Install a new bulb by pushing it into the socket and twisting the holder back into place clockwise.
- Replace the panel or cover and give your lights a test run to ensure everything is working as it should.
While replacing bulbs is something you can do on your own, not all issues may be as straightforward. Problems like a faulty fuse, corroded sockets, or wiring issues might need professional attention. Regular checks are recommended - even if everything seems to be working fine. This proactive approach could help in identifying issues before they become bigger problems.
Moreover, keeping the tail lights clean also ensures maximum brightness and visibility. Use a soft cloth and a mild cleaner to wipe down the lens regularly, especially during harsh weather conditions where grime and dirt can build up quickly.
In addition to your lights, always remember to check your indicators and number plate lights during routine maintenance for a comprehensive rear lighting check. Ensuring all your rear lights are functioning properly will enhance both your safety and that of others on the road.