Your Selected Vehicle
Parts for your 1985 Suzuki Swift-Headlights
OEX 2.5mm 5 Core Trailer Cable, With Black Sheath - 10m Blister Pack (NZ Ref.205) - ACX0820-10BL
Fitment Notes:
Narva Model 63 Front End Outline Marker, Side Indicator (Amber) Or External Cabin Marker Lamp Black Base And 0.5M Cable
Fitment Notes:
Explore 4WD & Adventure
OEX Rocker Switch On/Off DPST 12V Green Illumination (Contacts Rated 20A @ 12V) - ACX1959BL
Fitment Notes:
OEX 12mm Dual Wall Heat Shrink Polyolefin with Adhesive Tubing Red 1.2M - ACX1294RL
Fitment Notes:
Narva Battery Master / Isolation Switch Lever Type (Contacts Rated 180A @ 12V) - 61070
Fitment Notes:
LED Autolamps 10/30V Amber Emergency Bar Clear Lens With Amber LEDs 19 Selectable Flash Patterns - LB964ACM
Fitment Notes:
Stedi ST1K Series 21.5 inch Yellow Lens E-Mark LED Driving Light Bar - LEDST1K-20-20L-YEL
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Fitment Notes:
Narva Low Profile High Powered 6 LED Strobe/Warning Light Amber 12V/24V - 85206A
Fitment Notes:
Headlights Maintenance and Replacement for Your 1985 Suzuki Swift
Maintaining the headlights on your 1985 Suzuki Swift is crucial for ensuring safety and visibility while driving. It's important to regularly inspect and service your vehicle's headlights to keep them in optimal condition.
Let's start with the basics. The headlights on a 1985 Suzuki Swift are typically sealed beam units. This means that the bulb, lens, and reflector are all part of a single unit. Although these types of headlights may seem dated compared to modern systems with replaceable bulbs, they are quite straightforward when it comes to upkeep and replacement.
Here's a simple guide on how to replace the headlights on your Suzuki Swift:
- Gather Your Tools: You will need some basic tools such as a screwdriver and possibly a wrench. Ensure you have the correct replacement headlights, usually accessible through auto parts retailers.
- Remove the Headlight Bezel: Open the bonnet and locate the headlight assembly. The first step is to remove the headlight bezel, which is the outer cover. This is generally held in place with screws that need to be carefully taken out.
- Disconnect the Wiring: Before you can fully remove the headlight assembly, you will need to disconnect the wiring. Look for the connector at the back of the headlight and gently unplug it.
- Remove and Replace the Headlight: Take out the retaining ring or screws that secure the headlight in place. Slide the old headlight out and position the new one in its place. Attach it securely using the retaining ring or screws.
- Reconnect the Wiring and Install the Bezel: Once the new headlight is fitted, plug the connector back into the headlight and ensure it is securely attached. Finally, reinstall the headlight bezel to complete the process.
Performing this maintenance task on your own can be quite satisfying, plus it ensures you're familiar with your vehicle's requirements. Always inspect your headlights periodically for any signs of wear or failure, such as foggy lenses, dimming, or flickering. If you notice any of these issues, it might be time to give your headlights some attention.
Remember, maintaining your headlights not only ensures clarity of vision during night drives but also contributes to road safety by making your vehicle more visible to others. While it might be tempting to delay maintenance, proactively addressing headlight concerns will save you time and potential hassle in the long run.