Sealwell Coolant System Conditioner 2 Pack - T51012

Sealwell Coolant System Conditioner 2 Pack

SealWel cleans, seals and lubricates the cooling system, with cleaners, sealers and lubricants included in the unique formula.

• A clean cooling system is easier to repair, so a cleaning process occurs first, to remove scale and rust, leaving a clean area for SealWel to make the necessary repair. Because of this cleaning action, you may notice an increasing flow of coolant in the system.
• After cleaning, the leakage will begin to slow down as the exclusive SealWel formula begins to line the leak with repair material.
• As more coats of repair material are formed over the site of the leak, the opening is progressively sealed.
• A layer of repair material is formed over the inside of the hole, so that it is sealed from the inside, through the hole to the outside, with the exclusive plastic-like repair material. This repair expands and contracts with changes in temperature and operating conditions.
• Finally, a non-oily lubricant minimises wear and tear on critical moving parts in the system such as water pumps, thermostats and heater valves.

• Safe for aluminium, alloy and all other metal components
• User friendly: easy to use, no need to drain antifreeze (unlike other sealers)
• Preventative: stops leaks and seepage from developing
• Economical: 1 cube sufficient for most car engines
• Reliable: used by engine reconditioners and radiator shops for over 75 years
• Been Proved on road and track for over 75years

Repco's extensive range of leading brand radiator stop leaks and cooling system flushes will give you the solutions you need to ensure your vehicles radiator and cooling system remain cool and trouble free.

As with many vital components in your vehicle the cooling system and radiator require more than just ensuring the coolant levels are topped up at each service. Coolants over time break down and lose their effectiveness as with any fluid that your vehicle requires. When this happens your vehicle many suffer from overheating and this in turn may lead to damage of internal parts such as water pumps or in the event of coolant loss more significant issues such as blown head gaskets.

By using a quality coolant flush and running this through your vehicle every 3-5 years you will ensure the dirt and rust build up is removed and will allow your new coolant to keep your car cool and your internal components free from corrosion. Alternatively if you have cooling system issues and you coolant levels drop over time this may require a radiator stop leak additive to repair this. These additives work by running through your coolant system and reacting with exposure to air which in turn forms a seal to block the coolant loss.

At Repco we have the radiator additive solutions to ensure you remain on the road and with a store near you we can help get you sorted sooner. Browse online or shop in store to choose the right product for your car and at a price to suit any budget.