RAPTOR is the tough Aussie coat for Your 4WD

More Than Just a Fancy Paint Job

This is a seriously tough coat built to handle anything you throw at it. Unlike regular paint, RAPTOR lays down a thick, protective layer that'll shield your 4WD from:

The brutal sun: RAPTOR's got excellent UV protection, so your 4WD's colour will stay looking mint for years to come. No more worries about the sun bleaching your paint!

Scratches and scrapes: This tough coating can handle the knocks and bumps of everyday driving, keeping your 4WD looking schmick even after a beating.

Rusty bits: RAPTOR acts like a suit of armour against moisture, stopping rust from forming and keeping your 4WD's important metal bits healthy and safe from corrosion.

Water damage: Whether you get caught in a bucketing rainstorm or head down a muddy track, RAPTOR's waterproof shield will keep your car protected.

Customisable Styles

It comes in black, white, and tintable versions, so you can match your 4WD's current paint job perfectly with your 4WD's color code or go for something completely different to show off your personality.

Any Textured Finish

If you want a textured finish on your 4WD, RAPTOR Coating has got you covered.

You can choose to apply it in a smooth finish for a classic look or a more rugged, textured finish for something a bit more unique.

The good news is, you don't need to be an expert to use RAPTOR Coating. Even if you're a weekend warrior who likes to tinker with your 4WD, you can give it a crack yourself with its easy application.

There are a few different ways to apply it:

Spray gun: If you want a showroom finish, a spray gun and a dedicated spray booth are the go.

Roller: Want a textured finish or need to cover smaller areas? A good-quality roller will do the trick on those smaller surfaces.

Brush: Even a simple brush can be handy for getting into those tricky spots on your bull bar or tight corners.

Beating the Competition

Here's why RAPTOR knocks out the competition:

Super tough: Protects your 4WD from the sun, offering excellent UV, scratch, corrosion, and saltwater protection.

Built to last: Up to five times thicker than regular paint, so your 4WD looks tops for ages.

Easy to use: Even DIY enthusiasts can give it a go with a few tools and some elbow grease.

Look the part: Comes in two colours plus tintable versions and textures to personalize your ride.

Goes everywhere: Slap it on your whole 4WD, the bumpers, the bull bar, even the ute tray – it's not just for bed liners anymore!

The Verdict

So, if you're a 4WD lover and want to keep it looking its best, RAPTOR Coating is the deadset winner. It'll give your 4WD a killer look and protect it from the harsh Aussie conditions.

Want to give your 4WD the RAPTOR Coating treatment? Here's a quick guide:

• Pick the right RAPTOR Coating product based on the finish you want and how you're going to apply it.
• Grab your spray gun, roller, brush, or a mix depending on what you choose to do.
• Get the surface ready by giving it a good clean and sand it down so the RAPTOR sticks properly.
• Check the instructions on the packaging and online resources will tell you exactly how to apply it.

With RAPTOR Coating, your car will look amazing and be tough enough to handle anything you throw at it. It's the ultimate protection.