XView Dash Cam Hardwire Kit with USB and Parking Mode - XVHWC

XView Dash Cam Hardwire Kit with USB and Parking Mode

If you want a cleaner, more permanent dash cam installation, this XView hardwire kit is the practical finishing touch. It powers a compatible XView dash cam from your vehicle's fuse box, freeing up the accessory port for charging a phone or running other in-car accessories.

• Keep your accessory socket available: Hardwiring your dash cam means it no longer needs to occupy your vehicle's power outlet, leaving that connection free for the equipment you use every day.
• Create a neater cabin: Routing the wiring behind trim helps reduce loose leads around the windscreen and centre console, giving your dash cam installation a more discreet, clutter-free finish.
• Enable protection while parked: The kit enables Parking Mode on compatible cameras, allowing the dash cam to record incidents when your vehicle is parked and the ignition is switched off.
• Made for compatible XView cameras: This hardwire kit is suitable for use with XView XV20DVR and XV22DVR dash cams, making it the right accessory when you want to unlock their Parking Mode function.
• Everything needed for fuse-box connection: Cables, fuses and piggy-back fuse adapters are included to support a straightforward hardwired setup, without cutting or splicing into your vehicle's original wiring.
• Designed for vehicle electrical systems: The kit accepts DC 12V to 30V input and provides a 5V/1.5A USB power output. Low-voltage protection is set for 12V and 24V installations to help protect your vehicle's battery.

For a tidy, everyday dash cam fitment with the added benefit of parked-vehicle recording, this XView hardwire kit is a smart upgrade. It provides a powered USB socket; the device USB cable is not included and is supplied with compatible XView dash cams or available separately.

Product Specifications