Skip to content Skip to navigation menu

Projecta Jumper Leads 900A Surge Protected 6m - SB900-60SP

SKU: A1218394

$740 each

  • 900A
  • Surge protection - Guards vehicle electronics from voltage spikes
  • Storage bag - Convenient carry bag for storing cables
  • Pure copper cable - Offering superior conductivity and insulation for exceptional current transfer
  • Fully insulated clamp - Protects user from accidental short through clamps
  • Brass teeth clamp
  • 6m Long
  • Cable size: 50mm2
  • Ideal for heavy commercial & industrial applications
^ Show More Show Less

Projecta Jumper Leads 900A Surge Protected 6m

Quality constructed booster cables suitable for 12V or 24V batteries. Ideal for workshop use suiting larger 8 cylinder vehicles, commercial vehicles, construction and earth moving machinery.

Make sure you follow the instructions on the pack before connecting your jumper leads. Make sure the batteries are of the same voltage, make sure the car's don't touch, make sure the engines are off, the car is in neutral or park and the handbrake is on before connecting the battery jumper cables.

Vehicle starting sequence for negatively earthed vehicles:

  1. Connect the RED lead to the positive + terminal of both vehicles batteries.
  2. Then connect the BLACK lead to the negative - terminal of the boosting battery and then the engine block of the vehicle with the FLAT battery.
  3. Start the engine of the BOOSTING vehicle and allow engine to idle normally.
  4. Start the engine of the vehicle with the FLAT battery and allow engine to idle normally.
  5. Once the engine of the vehicle with the FLAT battery is idling normally, turn off the BOOSTING vehicle and disconnect the booster cables in the reverse order.

Repco's range of Jumper Leads are ready jump start a car whenever you need to. Check out the full range of Battery chargers, jump starters online or visit a Repco store near you.