Projecta Pro-Charge Battery Charger - 12V 8A - PC800

Projecta 8A Pro-Charge 12volt Battery Charger

This 6 stage Battery Charger was designed with the home handy-man or DIYer in mind. Made for a range of 12 volt lead acid battery options. The PC800 is a fully automatic battery charger with 6 charging stages and is designed to charge a range of recreational vehicles, cars and 4WDs. The benefit of the automatic charge is that you can clear your head for a few hours and leave the charger connected to the battery indefinitely with no chance of overcharging. The PC800 charger is suitable for a range of 12 volt automotive, marine and calcium and deep cycle batteries. The sophisticated electronic monitoring system provides a reduction in charging time and delivers a professional result.

If you're looking at charging a calcium battery back to life, the Calcium Mode changes the profile of the charge to deliver a complete and proper job. If your calcium battery has been deeply discharged and requires an equalisation charge to restore a full electrolyte reading, then this charger is for you! For those batteries that are tired and worn, the Rejuvenation Mode breaks down sulphation and revitalises the cells of the battery to increase performance. It's a lightweight and compact unit that definitely doesn't compromise on performance. The PC800 is spark-free and is protected against accidental reverse connection making them very safe to use.

This unit comes with optional side wings to easily mount to the workbench or garage wall. Remember to give adequate ventilation to the cooling vents if you choose to mount by providing at least 10cm clearance. The battery charger's interface will also allow you to control the charge rates and charge mode, to give you complete control.

Product Specifications