Skip to content Skip to navigation menu

Projecta

Projecta 12/24V Battery Surge Protector - SG130

SKU: A1110635
$97 each
Features
  • Protects vehicle electronics against a voltage spike when jumpstarting
  • Correct connection L.E.D indicator
  • L.E.D battery level indicator
  • Suits cable 10mm2 (8 B&S) to 70mm2 (00 B&S)
  • Quick and easy to fit
  • Rugged rubber housing
^ Show More Show Less

Product Details

Projecta 12/24V Battery Surge Protector

Protect your vehcile's electronics againist a voltage spike when jumpstarting with a Projecta 12V/24V 'Spikeguard' Surge Protector! This model offers a quick, easy fit and has a built-in LED Indicator to ensure correction connection. The battery level is displayed on the easy-to-read face of the SG130 Surge Protector on an LED Battery-Level Indicator, which is safely in the rugged rubber housing.

Make sure you follow the instructions on the pack before connecting your jumper leads. Make sure the batteries are of the same voltage, make sure the car's don't touch, make sure the engines are off, the car is in neutral or park and the handbrake is on before connecting the battery jumper cables.

Vehicle starting sequence for negatively earthed vehicles:

  1. Connect the RED lead to the positive + terminal of both vehicles batteries.
  2. Then connect the BLACK lead to the negative - terminal of the boosting battery and then the engine block of the vehicle with the FLAT battery.
  3. Start the engine of the BOOSTING vehicle and allow engine to idle normally.
  4. Start the engine of the vehicle with the FLAT battery and allow engine to idle normally.
  5. Once the engine of the vehicle with the FLAT battery is idling normally, turn off the BOOSTING vehicle and disconnect the booster cables in the reverse order.

Repco's range of Jumper Leads are ready jump start a car whenever you need to. Check out the full range of Battery chargers, jump starters online or visit a Repco store near you.

Questions And Answers

Reviews