Skip to content Skip to navigation menu

Matson

Matson 12/24V Battery Surge Protector - MA20121224

SKU: A1291553
$106 each
Features
  • Ideal for eliminating damage caused by voltage surges and spikes when welding on a vehicle or working on vehicle electrics
  • Commercial vehicles, 4WD, automotive and marine application
  • Protects electronics from voltage spikes and surges
  • Easy operation with reverse polarity alarm
  • Suits 12V / 24V applications
  • Unique patented design
^ Show More Show Less

Product Details

Matson 12/24V Battery Surge Protector

Ideal for eliminating damage caused by voltage surges and spikes when welding on a vehicle, this surge protector protects sensitive electronics from voltage spikes and surges.

Make sure you follow the instructions on the pack before connecting your jumper leads. Make sure the batteries are of the same voltage, make sure the car's don't touch, make sure the engines are off, the car is in neutral or park and the handbrake is on before connecting the battery jumper cables.

Vehicle starting sequence for negatively earthed vehicles:

  1. Connect the RED lead to the positive + terminal of both vehicles batteries.
  2. Then connect the BLACK lead to the negative - terminal of the boosting battery and then the engine block of the vehicle with the FLAT battery.
  3. Start the engine of the BOOSTING vehicle and allow engine to idle normally.
  4. Start the engine of the vehicle with the FLAT battery and allow engine to idle normally.
  5. Once the engine of the vehicle with the FLAT battery is idling normally, turn off the BOOSTING vehicle and disconnect the booster cables in the reverse order.

Repco's range of Jumper Leads are ready jump start a car whenever you need to. Check out the full range of Battery chargers, jump starters online or visit a Repco store near you.

Questions And Answers

Reviews