Car Builders Premium Under Bonnet Insulation

Car Builders Peel & Stick Heat Shields – Easy and Versatile to Install

Car Builders Peel & Stick Heat Shields have a pressure sensitive adhesive that makes these heat shields easy to install, particularly in tight spaces. Applied directly to the surface being protected, it is widely used as a thermal barrier in many industries and works effectively to block heat around fuel tanks/systems, tunnel shields, floor pans, exhaust systems, body shields, transmissions, fluid lines and to protect non-ferrous materials. Constructed from a needle punched fibreglass with a polyester core and durable aluminium face. The product has been oven tested for 30 hours with no failure at 475ºF (246ºC).Lite is easy to form with the top aluminium layer 0.05mm thick and the polyester/fibreglass base layer at 3mm thick. This product suits applications where greater versatility is required on irregular surfaces such as under bonnet, motorcycle fairings, inner guards, air boxes, batteries etc. For applications over flatter surfaces or near exhaust systems and heat elements, as well as road facing applications, it is recommended to use Peel & Stick Heat Shield Heavy.Behind the trim panels, carpet and boot mats on your classic vehicle lay the benefits of using the range of car builder products from Repco. Products such as sound deadener, waterproof underlay and wiring loom tape enable you to minimise drumming, noise, and heat transfer to provide a comfortable and insulated ride. Tested and backed by industry professionals make the Repco range of quality Car Builder products your first choice when it comes to heat and sound insulation. Don't let the drone of road noise overtake the sweet sounds of your V8 or hot 6 when using the right insulating products from Repco.