Car Builders Butyl Sound Deadener - Black

Car Builders Stage 1 Sound Deadener

The Stage 1 Sound Deadener Kit is a vibration dampening mat, that targets panel resonance noise. It consists of a butyl-rubber, base layer combined with an aluminium top layer. The noise absorption butyl-rubber base layer is pressure sensitive and inherently sticky, eliminating the risk of an adhesive layer failing. As used by leading manufacturers, Car Builders Stage 1 Sound Deadener strengthens panels, controls noise and vibrations and creates waterproof base. Unlike the old-style tar or bitumen sound deadening materials, it does not require heating, does not smell and will not deteriorate or go brittle over time. Car Builders Stage 1 Sound Deadener comes in three colour choices: black with silver Car Builders logo, silver with black Car Builders logo or plain black (no logo). Each box has 12 sheets and is 300x500mm and 2.2mm thick. Behind the trim panels, carpet and boot mats on your classic vehicle lay the benefits of using the range of car builder products from Repco. Products such as sound deadener, waterproof underlay and wiring loom tape enable you to minimise drumming, noise, and heat transfer to provide a comfortable and insulated ride. Tested and backed by industry professionals make the Repco range of quality Car Builder products your first choice when it comes to heat and sound insulation. Don't let the drone of road noise overtake the sweet sounds of your V8 or hot 6 when using the right insulating products from Repco.