Autoglym Exterior Trim Restorer Kit

Autoglym Exterior Trim Restorer Kit

Revive Faded Trim. Protect It for Longer.

Restore tired exterior plastics to a rich, factory-style finish while helping protect new trim from premature ageing. The advanced formula leaves a clean, satin appearance without a greasy feel, and is designed to resist streaking and run-off in wet weather.

Restore Colour and Defend Against the Elements

Australian UV, heat and changing weather conditions can quickly leave exterior plastics looking faded and worn. This trim restorer refreshes aged bumpers, wheel arches and plastic trims while providing durable protection against future exposure.

SolGel Technology for Lasting Results

Powered by SolGel technology, the coating penetrates the surface of the plastic and bonds within its micropores. This creates a tough, weather-resistant protective layer with real-world durability of three months or more.

Made for Everyday Conditions

Ideal for use on exterior plastic trim, including bumpers and wheel arch mouldings. A small amount goes a long way, making it a practical choice for enthusiasts and everyday vehicles alike.

How to Use

1. Clean and dry the surface
   Wash the area thoroughly and ensure it is completely dry. Remove any wax, polish or existing trim dressing before application.

2. Apply sparingly
   Apply a small amount of product to the microfibre side of the supplied applicator pad—not directly onto the trim. Spread evenly across the surface, ensuring full coverage. Protective gloves are recommended but not required.

3. Allow to bond
   Leave the product to bond for approximately five minutes. Do not buff immediately after application.

4. Remove excess if required
   Use a clean microfibre cloth to gently remove any excess product, particularly from nearby painted surfaces.

5. Allow to cure
   The vehicle can be driven as normal, but avoid rain and washing the vehicle for at least 24 hours to achieve maximum durability.