As world leaders in leaders in replacement and performance automotive springs King Springs leads the way in the design and manufacture of car springs for your vehicle. Whether it's lowering a car a few inches for less body roll or for a full set of performance springs for a motorsport application King Springs have the solutions for you. All manufactured in Australia using the highest quality steel and computer controlled processes means that whatever the car, commercial truck, SUV or 4x4 King Springs should be your aftermarket spring of choice.
Having the right coil springs fitted to your vehicle makes all the difference when it comes to load carrying or keeping your vehicle planted on or off road. King Springs stock a vast array of options ranging from standard replacement springs, heavy duty springs and sports and performance options meaning King Springs hold the best suspension parts to complement or upgrade your vehicle.
The correct suspension set up of your vehicle is vitally important when you are looking to have it perform its best, and upgrading the springs is an area that can gain significant benefits. To find the right coil spring option for your application the range of King Springs consist of:
Low Coil Springs - Get that planted road holding that comes from lowering your vehicle whilst reducing body roll. A set of Low King Springs lowers vehicle approximately 30mm below standard and every set of low springs are wound to achieve the correct spring rate. It's important to still maintain the correct spring rate to limit your vehicle bottoming out on roads or over speed humps when the suspension is compressed.
Standard Height Coil Springs - Restore your vehicles sagging factory springs with a set of quality standard replacement King Springs. Utilising factory spring rates to give you that smooth ride, a replacement set of standard springs will also restore steering and suspension geometry to improve handling.
Raised Coil Springs - Raising your vehicle approximately 20mm in the front and approximately 30-40mm in the rear these springs are recommended when fitting a bullbar, excessive towing, load-carrying or whenever increased ground clearance is desired. Perfect for getting outdoors and offroad, this option is available for many vehicles currently on road.
Super Low Coil Springs - Lowers vehicle approximately 40 - 50mm below standard. Only ranged on a limited number of vehicles.
A wheel alignment is recommended after having your new King Springs front springs fitted to your vehicle, whilst some cars will also require a wheel alignment on the rear when rear springs are fitted. Ask your local wheel alignment specialist which is best for your car. When replacing coil springs it's also a good time to look at replacing your shock absorbers, replacing or upgrading to a shortened or raised shock absorber can vastly change how your car handles and grips the road so don't overlook it. we also recommend looking at the condition and wear on your suspension bushes and steering components at the same time to make sure your wheel alignment stays true. Check out the full range of King Springs online or order today at a Repco store near you.
