Skip to content Skip to navigation menu

Repco Coolant Green Pre-Mix 5L - RPREGREEN05

SKU: A1311844

$28 each

Check that it fits your vehicle. Select your Vehicle
  • Premium Pre-Mix
  • Anti-Freeze / Anti-Boil / Anti-Corrosion
  • Contains 350g/L Ethylene Glycol
  • Ready to use at 33% concentrate
  • 5 years or 300,000kms*

Repco Green Coolant Pemix 5L - Premium grade coolant suitable for multi-valve, turbo and supercharged engines

Repco's Green Coolant is safe for vehicles which require a premium Type A Hybrid Green coolant. Some of the popular manufacturers which use this coolant include Audi, BMW, Ford, Holden, Hyundai, Jeep, Kia, Mazda, Mercedes Benz, Mitsubishi, Porsche, Subaru, Toyota Volvo, Volkswagen and more.

Repco Green Coolant is specially formulated to perform and protect your vehicle in the most extreme of weather conditions whether it be a scorching hot summers drive or a freezing weekend at a ski resort. This long-life coolant combines ethylene glycol with a powerful corrosion inhibitor system to offer superior anti-rust protection, minimising the potential of any corrosion to your radiator, water pump and other cooling system components even at high engine loads and extreme weather conditions. This coolant is specially formulated for a longer service life than other coolant brands. It is rated for up to 5 years or 300,000kms of use meaning you can spend more time on the road enjoying your car and less time under it in the garage performing maintenance. Repco Green Coolant is suitable for use in high-performance multi-valve engines and also suits the high demand of turbocharged or supercharged engines which often require the best cooling possible due to the excessive engine temperatures from forced induction systems.

This green coolant meets or exceeds the performance requirements of the following cooling system specifications:

  • AS 2108-2004 for Type A coolants
  • ASTM D 4340 Heat Rejection Aluminium Test
  • ASTM D 1384 Glassware Corrosion Test
  • ASTM D 3306
  • ASTM D 4985
  • GM 1825M / 1899M
  • HOLDEN HN2043
  • Ford ESE M97B44-A
  • Ford M97B51-A1
  • SAE J1034

When changing your coolant, we recommend using a quality radiator flush and corrosion inhibitor to maximise the longevity of your new coolant and all your other cooling system components such as your radiator and water pump. To shop our whole range of oils and fluids, visit the Repco website or head into your local Repco store and speak with one of our friendly staff today.

Become a Repco Rewards Member

Repco Rewards

Earn Points. Get Rewarded.